best price china professional grain storage steel silos
2 Set/Sets per Month
Packaging & Delivery
Silo roll forming machine(Only for reference)
Maximum production speed: not less than 18 meters per minute (for non-perforated profiles, excluding cutting); Bending precision: the maximum profile deviations (dimensions and shape) shall not exceed the tolerances specified in EN 10162 (or equivalent tolerances); Bending quality: ability to bend the profiles of the specified configuration at the specified maximum steel thickness; cracking of the steel or metal coating is not permitted for all required steel grades, when observing the products under magnification ten times.
If you have your own special requirements,our machine can be also customized.
profile as following:
1) Material of the profile: 195-235Mpa GI or carbon steel 2) Thickness range: 3-4mm 3) Main motor power:60kw, AC motor, motor inside of main machine (Brand: Guomao of China) (according the final design) 4) Machine Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase 5) Roll station: about 20 stations (according the final design) 6) Roller material:Gcr15 bearing material chrome plated surface with hardness 58-62 degree ,CNC, 7) Shaft diameter: ￠150mm material: SAE1045 with quenching and tempering 8) Machine roll forming speed:18m/min 9) Transmission: by gear box 200*500(outside is cast iron, surface needed polish and paint. Inside is 60# forge and press metal) 10) Roll former has leveling bolts in the base for adjust the leveling 11) Machine base frame adopt H beam welding steel 12) In the main roll forming machine have 2 buttons for urgency stop if happen any malfunction. 13) Machine adopt new station to make machine more strong 14) To avoid accidents,all of drive part adopt protect cover 15) Color of machine: Blue and yellow (or base on customer request)
10T hydraulic decoiler:
Steel coil width: from 1250 mm to 1500 mm;
Internal diameter of coil: variable, from 470 mm to 620 mm
Maximal out diameter:1600mm Maximum coil weight: 10000 Kg;
Oil cylinder dia:120mm Working speed: 0-15m/min adjustable Main motor power: 7.5KW AC motor Hydraulic power: 5.5kw Speed controlled by frequency converter brand: Yaskawa De-coiler should be with Loop control and hold down, and with baffle for forbid coil fall down The decoiler has 4 segments
Material of the profile: 195-235Mpa GI or carbon steel Thickness range: 3.0-4.0mm Maximum production speed: not less than 18 meters per minute (for non-perforated profiles, excluding cutting) Main motor power:60kw, AC motor, motor inside of main machine (Brand: Guomao of China) Machine Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase Roll station:20 stations Roller material:Gcr15 bearing material chrome plated surface with hardness 58-62 degree ,CNC, Shaft diameter: ￠150mm material: SAE1045 with quenching and tempering Transmission: by gear box 200*500(outside is cast iron, surface needed polish and paint. Inside is 60# forge and press metal)
The punches and dollies will be CR-12, hardness HRC 58-62 and chrome coating both punches and dolies should be easily replaceable without requiring disassembly of complete units. The whole punching operation should be automated and controlled by a program installed in the PC which is located in the operator's console. Hydraulic power: 5.5kw Working pressure: 12-16Mpa
Machine adopt hydraulic cutting
Cutting after forming: Cut the sheet after roll forming to required length Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start. Material of blade: CR12with heat treatment Length measuring: Automatic length measuring Tolerance of length: 4700mm+/- 2mm
Auto stacker and transmission table:
Take the sheet by air compressor, 5.5KW( provide by customer) Air cylinder swing arm size: 40mmx80mm Transmission power:4kw AC motor Stacker length in 12m, transmission table length in 25m Drive of transmission by 1.0inch double line chain Transmission roller: ASTM1045 with chrome, diameter of roller is in 80mm Carrying capacity: maximal 5000Kgs Length of capacity: 500-12000mm The maximal stacker height: 300mm
Hydraulic power: 11kW Working pressure: 20-25Mpa adjustable Solenoid valve: 3 group Hydraulic oil: 46# hydraulic oil Color: Blue (or base on customer request)
1)Programmable setting of profile length and quantity 2)Automatic stopping of the equipment after completion of the cutting programme.
3)Operating system language: English and Chinese
4)Computer used to control length & quantity. Machine will automatically cut tolength and stop when required quantity is achieved 5)PLC brand: Panasonic 6)Frequency converter brand: Yaskawa, quantity: 1 7)Touch screen: Taiwan Weinview
If any needs or questions, feel free to contact me please. We would like to design the machine for you Mob/WhatsApp: 008618551231440 WeChat: 243554222