notice Note: Please be cautious and check with your supplier if this product is for virus protection purposes and if the coronavirus (COVID-19) will affect your order. close

CALT DY220 load cell weight transducer relay Alarm output weighing control indicator

  • 1-99 Sets
  • 100-999 Sets
  • >=1000 Sets
- + Sets available
$66.00 /Set, 1 Set (Min. Order): Buy Samples
0piecesselected, US $in total
View Details
Shipping fee:
Depends on the order quantity.
Lead Time:
2 day(s) after payment received
Customized logo (Min. Order: 20 Sets)
Customized packaging (Min. Order: 30 Sets)


Graphic customization (Min. Order: 50 Sets) Less
Contact Supplier
Samples - $66.00 /Set, 1 Set (Min. Order): Buy Samples
Loading... Add To Cart
Report Suspicious Activity
Quick Details
Place of Origin:
Shanghai, China
Brand Name:
Model Number:
Power Supply:
Display Type:
LED indicator
sampling rate:
80 times/second
Measurement accuracy:
Indication range:
1000~5000 ppr
The largest sub-degree:
Supply voltage:

Packaging & Delivery

Selling Units:
Single item
Single package size: 
16X14X12 cm
Single gross weight:
0.500 kg
Package Type:
Standard strong export carton box
Lead Time :
Quantity(Sets) 1 - 50 51 - 500 >500
Est. Time(days) 2 5 To be negotiated
Product Description


CALT DY220 load cell weight transducer relay Alarm output

weighing control indicator




1. Analog input

Analog inputs use 20 bits AD chip, Count Speed up to 80 times / sec, the measurement accuracy of 0.2%

Display range -9999 ~ 19999 .The largest sub-degree 50000. For the bridge voltage 5V, 100mA


2. The switch output

3 relay or OC outputs. Relay contacts AC 250V / 1A, OC output drive 100mA / 48Voptional.


3. Transmission output

Output 4-20mA, 0-10V, 12bit precision driving 500 ohm load. Optional features.


4. communication port

485,232 communication interface, upload executable modbusRTU and active protocol. This function is optional. Only can choose one function with transmission function


5. A simple comparison output

Features: 3 output meter can be set to be greater than or less than the comparative comparison. When the measured value exceeds the upper limit output is active when the measured value is less than the upper limit minus hysteresis output is invalid. If the output is less than comparison, the measured value is less than the lower limit of the output is active when the measured value is greater than the lower limit plus hysteresis invalid.




Operation :









Menu Structure

3.1 parameter modification. Standby mode, press [k1] + password to enter the password written 100. Entering advanced parameters (13 parameters later) password is written 105. Specific steps are as follows: Press [k1] key, there will be 00000, after press [k4] key to move the blinking digit moves to the flashing digit to be modified, press [k3] to modify the blinking digits, password changes is correct, press [k1] key to enter the set parameters, and then press [k1] to switch the set of parameters, select the parameter to be modified, press [k4] enter the parameters after the modification is completed, press [k1] OK to return to the measurement interface [k2]

3.2 weight calibration. Standby mode, press [k2], to see details of the third page (V: calibration method)

3.3 Key cleared. Standby mode, press [k4], and the measured value is less than zero range is completed is cleared.

3.4 restore the factory settings. 3.1 according to enter parameter modification (but need to enter a password to use special password) to switch to the first 42 parameters, enter a number between 11-19, and then press the [k1] to switch to the next parameter, press [k2 [to exit the way to restore the instrument parameters 1-9 initial state.


Display symbolically

A 1 Alarm outputvalue

b2 alarm output value

c3 alarm output value dalarm hysteresis AL alarm status strunning state E A / D code value dAtransmitter output code U Software version 


Calibration method

Standby mode, press [k2], appears E0xxxx, press [k4] is cleared, there E00000 zero calibration is complete. Press [k2] qualifying C00000, plus a known standard weights or heavy objects, press [k4], and then by pressing [[k3] to increase the value + [k4] to move the blinking digit, modified weight by weight, stable, press [k2] OK, the calibration is complete, the value and weight of the weights should be consistent, if not the exact same order again once calibrated, accurate after calibration, press [k1] return force measurement interface.




Related Products
Company Information

Shanghai Qiyi Electrical & Mechanical Equipment Co., Ltd. has specialized in parking heater and related products for many years, located in Chinese business and port center, Shanghai. CALT brand product ranges:  2kw 3kw 4kw 5kw air heater, 5kw, 8-12kw water heater, knob switch heater, remote heater and GSM heater.

 Qiyi company has got independent import and export qualification in 2013, CALT brand products have been exported to Australia, Europe, America and Russia and other countries and regions in the world.


Welcome to our factory 

Packaging & Shipping