CATV RF EOC Based on HomePlug AV Solution for Ethernet Over Coax
RF Receive sensibility:
1*DC12V power supply interface
200000 Box/Boxes per Month
Packaging & Delivery
A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag.
CATV RF EOC Based on HomePlug AV Solution for Ethernet Over Coax
OPTOSTAR OP-EOCS40011W is the EOC slave based on HomePlug AV solution for Ethernet access over coax. It works together with EOC master which is based on HomePlug AV solution as well to construct a two-layer Ethernet data transmission channel on CATV coax cable, provide the Ethernet access service based on the existing coax cable networking.OP-EOCS40011W is the slave with 4 Ethernet ports and WIFI. OP-EOCS40011W is based the Qualcomm chipset solution，with high anti jamming capability OFDM technology. The 7.5-65MHz low frequency band is used for EOC signals. Built in high isolation filter as CATV RF and EOC signal mixer, the EOC signal and CATV signal in 87~862MHz can run on one cable without interference. The PHY Layer speed is 600Mbps,the MAC Layer throughput is up to 320Mpbs.
Based on HomePlug AV solution and Qualcomm chipset 5-65Mhz frequency for EOC signals., no influence on CATV Service PHY Layer speed 600Mbps Support data encryption 4 100M auto-negotiation Ethernet port Support the isolation of slave under one master Support Port-based VLAN and 802.1q VLAN Support bandwidth limited Support QOS configuration based on slave port or VLAN. Support broadcast storm control. Support data packages count Automatically distribute configurations to newly connected slaves, available to use as soon as correctly connected and power on. Support WEB,CLI and SNMP management Support on-line upgrading
Interface & indicator
1*TV(RF signal) OUTPUT, metric F connector 1*CABLE(MIX)INPUT, metric F connector
4*10/100M auto-negotiation, RJ45
1 x power indicator 1 x system indicator 1 x CABLE indicator 1 x WIFI indicator LAN indicator(each Ethernet port has 1 indicator)
OPTOSTAR is a leading Chinese company specializing in the engineering and manufacturing of fiber optic products and end-to-end solutions.
For over 10 years, we had the privilege of providing many institutions, organizations and distributors around the world with optical fiber based network connectivity products and solutions.
Our mission is to provide a cabling infrastructure that is readily available across the world, a customer support exceeding all expectations, a custom manufacturing delivering a high quality on time and every time.
We recognize our clients as the corner stone of our success; we are always looking for ways to enrich their field experience. Our efforts for continuous improvement throughout our organization are our guarantee towards total customer satisfaction.
What we do
We design, manufacture and deliver quality based fiber optic connectivity products.
We provide end-to-end solutions and structured cabling systems.
We support the OEM business by integrating into our production lines, our customer's process and specifications.
We supply turn-key solutions, for instance, manufacturing and assembling plug-and-play racks and cabinets ready to be deployed in your telecommunications or equipment rooms.
We manufacture from the simplest to the most complex fiber optic assemblies.
Why choose us
Our state of the art in-house fiber optic and copper factories enable you to receive custom products and turn-key solutions to your exact specifications; profit from an unparalleled quality and manufacturing lead time and to capitalize on our technical team to reduce your design cycle and solve any technical difficulties you may encounter.
Our outsized in-house inventory for the quick replenishment of our partner's distribution points and for those on-site urgent deliveries many installation projects need. We make it a point to maintain at all times a comprehensive inventory level of each and every standard product we advertize, so you will never hear the "Out of Stock" excuse from us.
In collaboration with our distribution partners and for each distribution point, we have worked to establish an inventory program supporting a wide variety of OPTOSTAR products and to make them readily available throughout the world.
Standard Package suitable for shipment by Air or by sea.
(1)We use UPS DHL EMS TNT FedEx(The Delivery time is 2-12days after send goods) or Sweden Post, CN Post(The Delivery time is 10-35days after send goods) etc for the shipping. (2)When we receive your payment for goods, we will arrange the production if we have no stocks in our warehouse. And We will deliver the goods in the delivery day. (3)If we have enough stocks in our warehouse, your items will be delivered within 1-2 days. (4)We will send the tracking number to you after we have sent goods in order to you can know delivery status. (5)If you have any question,please to contact with saler. (6)OPTOSTAR will NOT charge any customer with Hidden fees on their order. All fees and charges will be calculated and displayed to you after you confirm the order
Passed the FCC authentication.
Passed the CE authentication.
Passed the ISO9001:2008 quality system authentication.
We have good relationship with OPTOSTAR and have stable business over 6 years. OPTOSTAR is reliable and has good reputation. Their products can always meet our quality requirements
-------- Feikje Gamblin
OPTOSTAR is the best seller I've ever met. They will never disappoint me. I like to do business with those nice people.
I already purchased lots of differents types of active products in OPTOSTAR for many times ,like fiber optic transceivers , media converters , OEO , PoE switches and so on ,i am extremely satisfied with their quality , compatibility and services , i really want to have a longstanding cooperation with them in the future .
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment. If you have another question, pls feel free to contact us as below: