pellet machine,tower crane and fire-proof materials,etc
commission paid time:
cleared upon receiving 100% payments
on-site inspection to our factory:
firmly and warmly welcome
50 Set/Sets per Day
Packaging & Delivery
Standard seaworthy export packing
5-30 days upon receiving 30% advance or original L/C reach us
companies looking for marketing agent
WE hope to tap pellet machine market of pround potential along with worldwide sale agents who are responsible and diligent. WE will render you commissions for your painstaking efforts.
Pls kindly note:
You can contact us directly by Skype:oncle_hugo
or Email:pelletmachine AT aol.com; info AT cs-machine.com
Wood Pellets are mainly made from any wood waste and biomass particles, such as wood sawdust, wood shavings, wood chips, wood logs, straw, rice husk, coffee husk etc.. Mainly Involved processes:
Wood crushing (if the raw material is not already granulated), material sieving, drying (if the raw material contains too much moisture), pelletizing, cooling, screening and packing. The whole pelletizing process can be highly automatically controlled.. Production capacity: 1 to 10 ton per hour is available.
1. Formation rate:98%,high output and low investment
2.Double layer die can use twice,reduce cost for customers.
3. Machine run stale.
4. Auto lubricate system,low consumption.
5. Finished pellets satisfy Europ standard.
Our complete wood pellet plant has a compact structure, low energy consumption and is highly efficient. Every machine in the wood pellet plant can be designed and manufactured according to customers' requirements. Professional technical guidance of installing the machinery is also available.The whole process of wood pellet line can be highly automatically controlled. It includes the below processes
Our complete wood pellet plant has a compact structure, low energy consumption and is highly efficient. Every machine in the wood pellet plant can be designed and manufactured according to customers' requirements. Professional technical guidance of installing the machinery is also available.The whole process of wood pellet line can be highly automatically controlled. It includes the below processes.
the wood pellets must be processed with wood powder.The trunk and branches of trees must be crushed into small chips by wood chipper, then the hammer mill process the chips into powder.
Wood hammer mill
The best material diameter for supporting to produce pellet is 1-5mm. Thus if your material diameter exceed 5mm, then you need crushing machine to crush and grind them into small powder 1-5mm for supporting to produce pellets. Our SFSP series chipping and crushing machine is your best choice. It mills raw material like tree branch, wood shavings, wood chips, wood logs, cotton stalk, corn stalk, wheat straw etc, with size less than 50mm (diameter). After milled, the output size can reach diameter 3-5 mm, then it is pushed to next process to get dried and pelletized.
2. Drying process – Rotary Dryer
The best moisture content to pelletizing is about 11-17%. Our rotary dryer is made up of burning stove and main rotary dryer which is high efficiency in drying the wood and biomass material. It can realize to reduce the moisture from 50% to 10%. The rotary dryer uses steam to heat air and contact material to remove certain degree of moisture. It is very important for wood pellet plant to using moisture detector which will determine the most suitable moisture before pelletizing.
3.Pelletizing pocess - Wood pellet mill of All full process to produce wood pellet
Pellet mill is the heart of the wood pellet production line, and has reliable running performance . It is special designed for compacting of wood, straw, and other biomass sources into pellets. Capacity ranges from 1T to 10T per hour. You can choose ring die pellet mill or flat die pellet mill depend on your capacity requirement. Our MZLH series Ring die pellet mill is best choice for large scale production, while, AMSPLM series flat die pellet mill is suitable for small pellet production line. Please feel free to contact us for more information.
4. Cooling process - Pellet cooling machine
Usually after pelletizing, the temperature of wood pellets is between 60-80 degrees and the moisture content is close to 15%. For storage purposes, a cooler must be used to reduce their surface temperature and the moisture content, also help screen good and pure pellets. However, considering the feedback from some foreign clients, the local climate is very humidity, they hope to cool the wood pellets with moisture 7-8%. In order to satisfy different needs from different clients, we develop one kind of new Stabilizer Combined Cooler.
5. Packing process - Pellet packing machine
After cooling process, the wood pellets will not directly enter into the fuel process, avoiding the wood pellet affected with damp, the packing process is very necessary. The packing process is effectively handled by our Semi-Auto Packing Machine.
Customized requirements are warmly and religiously accepted!
Seeing is believing!
Personal visiting is believing!
Your personal visit to our factory will be warmly welcome.