1.Plastic bag+individual colored box+carton+pallet 2.Individual plastic bag+one big plastic bag for one carton+carton+pallet 3.OEM&ODM
China GCr15 UCT Pillow Block Bearing T207 for Agriculture Machine
Pillow block bearing UCT207
Z1V1 Z2V2 Z3V3
P0 P2 P5 P6
No.2 lithium Grease
Place of Orgin
30% paid in advance,balance after the copy of B/L
XIAMEN,Ningbo,or ur requirement
The spherical outside surface ball bearingis a bearing based on the 62 and 63 series deep groove ball bearing, generally with double-sided sealing structure.
Large load capacity.
Good sealing quality.
Self aligning, esay to install and repair.
High impact fatigue strength.
High rotational accuracy.
Good lubrication,multiple oiling methods for easy operation.
Applicable to fixed or changing rotation direction.
Relatively high rotation speed stable operation.
The ones secured by the interference-fit method can also be used in application with high rotation speed and changing direction.
The Detailed Dimension of UCF200/300 Series Flange Bearing Units
The Tolerances for Take-up Unit Housings
The The Limiting Rotational Speed(RPM)
The limiting rotational speed of the mounted ball bearing untis mainly depends on the fitting between the shaft and the bearing. It is recommended that, under normal operating conditions, the fitting between the bearing and the shaft be H7. And the relevant RPM details are shown on the below table. Loose fitting is suitable for lighter load products which allow lower limiting rotational speed. On the contrary, Heavy load products which require higher limiting rotational speed should choose tight fittting named J7 fitting.
UC HC SA SB UCX CSA CSB SER UK
The Mounting Method of Take-up Units
The correct installation order is: first install the housing, then the shaft and the bearing.In principle, the bearing units can be easily installed at any place. However, in order to have a long service life,the mounting base should be flat and rigid. The Take-up units are mounted on two parallel slides, bearing centers to be adjusted by adjustable bolts. The relevant parts dimensions are shown as below:
Foundry Casting Workshop Pictures
FUJIAN FOS BEARING CO.,LTD was established on Oct. 24, 2005, with registered capital of RMB 10 million. "FSZ" is our registered trademark.
Our company is specialized in producing all kinds of bearing units, while also engaged in stainless steel bearing units, zinc alloy bearing units, pressed steel bearing units, deep groove ball bearings, taper roller bearings, spherical roller bearings, ceramic ball bearings and spherical plain bearings. 80% of our products are exported to Europe (mostly Germany & UK), North America, Southeast Asia, Middle East, Africa and Taiwan. And 20% to domestic markets.
The spherical radial ball bearings have UC/UK/UCX/HC/SA/SB/CSB/CSA/CS series, etc. The bearing units have P/F/FL/T/FC/PA/PH/PW/FA/FB/PG/PX/FX/C series, etc. All of the above series have complete moulds, and the materials for bearing units have grey cast iron and ductile iron. The sizes range from 201 to 218 and 305 to 328.