3-5 days for sample order,7-15 working days for bulk order
AC100-120V or 200-240V (50-60Hz)
Cool white,warm white,blue,green,red...
Every 0.5 meter ( RGB color : 1.0 meter / cut)
ETL,CE & RoHS
For single color LED strip
We use "D"shape PVC cover, like magnifying glass, can concentrate & magnify the lights, make the LED strip looks more bright!
For RGB LED strip Compared with others RGB led strip, we use the double loop in the circuit board, one led was broken, won't affect other leds, the led strip will be lighten on as always.This special design makes the RGB LED strip stabler than the normal one. The lifespan will be longer too.
7) Concealed lighting 8) Backlighting for signage letters
9) Channel letter lighting 10) Emergency exit path lighting
11) Cove lighting
1. Can be run in 220V or 120V without extra adaptor or power source;
2. Can be max run 50 meter and also be cut or connected in every meter or 0.5m; 3. PVC tube provides good waterproof and can be used both indoor & outdoor; 4. 120pcs 5050 LED per meter provide greater brightness; 5. Solid-state for high vibration resistance and good flexibility for any shape. 6. Many nice colors for your choce(blue,red,green,warm white cool white).
All the chips BET use good brand chip with 22-24 LM /per(5050),3528
7-8 lm,5630 50-55lm permeter, with
uniform light and low light decay with high quality and long life span, Two
years Guarantee, ETL, CE & ROHS
BET Strips use high transparent plastic material, It can bear high
temperature and with strong
anti-ultraviolet, While most of the
other normal strips only adopt muddy plastic material, this makes strips
not so bright and will be easily turn
yellow after short time using.
The LED and resistors BET mounted
is with vertical mounted, while the
others is with horizontal mounted.
This will be not so easy to fall off
with the mounting when make
BET Adopt pure cooper wire, With
super conductivity, Higher brightness and more uniform light.While the
common one only use the iron wire
with low material cost and poor
The PCB width we adopt is with
8MM, While others is only with 5MM, wider PCB is better for heat
dissipation and protect the LEDS.
BET adopt advanced machine and
technology for every process, you
can see our BET’s PCB inside is flat
while other’s is curly.
Take out the package,make sure it comes with necessary accessories,which should include : Fixing clips, Middle connector,End caps,Head wires.
Fix the strips with clips onto where you need,put the wire into sockets to light the strips.
Please cut the strips only along the cutting mark on the PCB,don't cut at random.Block up the end with end caps,
seal with enough glue to make sure it is still waterproof.
Plug the head wire into a strip to conduct the electricity,or plug a middle plug into the ends of two separate strips to connect them into a long strip,after well connected,seal all the plugs with enough glue.
RGB color need to connect a controller (pls kindly check installation accessories and steps as below).
We are professional manufacturer of LED products in Shenzhen,China.The products have achieved CE&RoHS&ETL. Factory directly offers a competitive price with high quality.