3.Bagasse pulp base 100% wooden pulp paper for paper cup, Food Grade, eco-friendly.
DIHUI high quality 240 gram paper
high quality 240gram pe coated paper
to make paper cups
Sugarcane bagasse pilp base paper
135-350 gsm are available
in roll dia roll dia:1200 Max, Core dia:3 inch
in roll width 600~1300 mm
in sheet L*W
As per custpmers' requirement
20z ~ 120z ,As per customers' requirement
flexo print or offset print
Strictly as per The 27 points of Quality Control System
QS, CAL, CMA
paper in roll (packed by craft paper with plastic film outside)
30% deposit, 70%before shipment by T/T, L/C, Western Union, Money Gram
How to make Paper cups?
Packaging & Shipping Details:
PE coated roll paper for paper cups
(1) Paper in Roll ( Packed by craft paper with plastic film outside)
(2) Paper Sheet (200 sheets/rim, packed by craft paper on pallet)
(3) Paper Fans (packed in cartons or pallet or bags)
15~20 days (1*40HQ)
Paper Cup Fan Procedure:
Q:How mang cup bottom are needed for the 1 ton cutting & printed paper ( cup body ) ?
A: As usually , the proportion is about 1:0.3 ( means 1 ton paper need about 0.3 tons bottom paper, just for reference!). Certainly , different cup size ,different gram,it's different. Please inquiry details!
Q:How to packing the paper ?
A:1:Sheet paper, packing by wooden pallet,250/350 sheets paper bag by craft paper , or some special requires form you.
2: Roll paper packing by crft paper and plastix film.
3:Cup blanks with preprint and precut, paper cartoons packing, clean-away the reject paper and packedged by paper cartoons , or leave the reject edges but packed by wooden pallet.
Q: How many ton of paper can load 1 *20 container?
A:1:Sheet paper, can shipped about 14~15 tons, more or less depends on size.
2:Roll paper can shipped about 13~14 tons, more or less depends on roll width.
3:Cup blanks with preprint and precut,paper cartoons packing, clean away the rejected wastes, it can be shipped about 17~18 tons ,( please note, here 17~18 ton is the weight including the weight of rejected edges and wastes )
Q: How many percent of the rejected edge and wastes after printing, cutting, and packaging ? ( how mang KG of cup blanks can get from 1 ton paper )
A: 1.For offset printing, the reject edge and wastes is about 15~16% ( means 1 ton sheet paper ,you can get 840~850KG S blanks ). ( Maybe more than this number if cup mould is most special or very big )
2. For flexographic printing, the total rejects is about 13~16% depends on your cup sizes and our Flexographic Plate Cylinders.
( Maybe more than this number if cup mould is most special or very big ).