| *Modular structure and extension withoptional cards *Standard MODBUS protocol via RS-485 *Complete Protection Functions *Easy Maintenance *Easy DC Bus Sharing *Modular Compact Design *Optional Fieldbus Modules |
*Space saving and easy DIN rail mounting
*Side-by-side Installation (40 oC)
*High-efficiency cooling and flexible spacing |  |
 | *Provide connection to a variety of networks,including PROFIBUS, DeviceNet and CANopen*Built-in PLC Function*PLC programming and editing capabi |
| AC 115V Voltage Class | AC 115v | ||
| Model Number VFD- E | 002 | 004 | 007 |
| Max. Applicable Motor Output (kW) | 0.2 | 0.4 | 0.75 |
| Max. Applicable Motor Output (hp) | 0.25 | 0.5 | 1.0 |
| Rated Output Capacity (kVA) | 0.6 | 1.0 | 1.6 |
| Rated Output Current (A) | 1.6 | 2.5 | 4.2 |
| Maximum Output Voltage (V) | 3-phase proportional to twice the input voltage | ||
| Output Frequency (Hz) | 0.1 ~ 599 Hz | ||
| Carrier Frequency (kHz) | 1 - 15 | ||
| Rated Input Current (A) | Single-phase | ||
| 6 | 9 | 18 | |
| Rated Voltage/Frequency | Single-phase 100-120 V, 50 / 60 Hz | ||
| Voltage Tolerance | ±10% (90 - 132 V) | ||
| Frequency Tolerance | ±5% (47 - 63 Hz) | ||
| Cooling Method | Natural cooling | Natural cooling | |
| Weight (kg) | 1.2 | 1.2 | 1.2 |
| AC 230V Voltage Class | AC 230V | |||||||||
| Model Number VFD- E | 002 | 004 | 007 | 015 | 022 | 037 | 055 | 075 | 110 | 150 |
| Max. Applicable Motor Output (kW) | 0.2 | 0.4 | 0.75 | 1.5 | 2.2 | 3.7 | 5.5 | 7.5 | 11 | 15 |
| Max. Applicable Motor Output (hp) | 0.25 | 0.5 | 1.0 | 2.0 | 3.0 | 5.0 | 7.5 | 10 | 15 | 20 |
| Rated Output Capacity (kVA) | 0.6 | 1.0 | 1.6 | 2.9 | 4.2 | 6.5 | 9.5 | 12.5 | 17.1 | 25 |
| Rated Output Current (A) | 1.6 | 2.5 | 4.2 | 7.5 | 11 | 17 | 25 | 33 | 45 | 65 |
| Maximum Output Voltage (V) | 3-phase proportional to the input voltage | |||||||||
| Output Frequency (Hz) | 0.1 ~ 599 Hz | |||||||||
| Carrier Frequency (kHz) | 1 - 15 | |||||||||
| Rated Input Current (A) | Single / 3-phase | 3-phase | ||||||||
| 4.9 / 1.9 | 6.5/ 2.7 | 9.7 / 5.1 | 15.7 / 9 | 24 / 15 | 20.6 | 26 | 34 | 48 | 70 | |
| Rated Voltage/Frequency | Single / 3-phase, 200 - 240 V, 50 / 60 Hz | 3-phase, 200 - 240 V, 50 / 60 Hz | ||||||||
| Voltage Tolerance | ±10% (180 - 264 V) | |||||||||
| Frequency Tolerance | ±5% (47 - 63 Hz) | |||||||||
| Cooling Method | Natural cooling | Fan cooling | ||||||||
| Weight (kg) | 1.1 | 1.1 | 1.1 | 1.9 | 1.9 | 1.9 | 3.5 | 3.5 | 3.57 | 6.6 |
| AC 460V Voltage Class | AC 460V | ||||||||||
| Model Number VFD- E | 004 | 007 | 015 | 022 | 037 | 055 | 075 | 110 | 150 | 185 | 220 |
| Max. Applicable Motor Output (kW) | 0.4 | 0.75 | 1.5 | 2.2 | 3.7 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 |
| Max. Applicable Motor Output (hp) | 0.5 | 1.0 | 2.0 | 3.0 | 5.0 | 7.5 | 10 | 15 | 20 | 25 | 30 |
| Rated Output Capacity (kVA) | 1.2 | 2.0 | 3.3 | 4.4 | 6.8 | 9.9 | 13.7 | 18.3 | 24 | 29 | 34 |
| Rated Output Current (A) | 1.5 | 2.5 | 4.2 | 5.5 | 8.5 | 13 | 18 | 24 | 32 | 38 | 45 |
| Maximum Output Voltage (V) | 3-phase proportional to the input voltage | ||||||||||
| Output Frequency (Hz) | 0.1 ~ 599 Hz | ||||||||||
| Carrier Frequency (kHz) | 1 - 15 | ||||||||||
| Rated Input Current (A) | 3-phase | ||||||||||
| 1.9 | 3.2 | 4.3 | 7.1 | 11.2 | 14 | 19 | 26 | 35 | 41 | 49 | |
| Rated Voltage/Frequency | 3-phase, 380 - 180 V, 50 / 60 Hz | ||||||||||
| Voltage Tolerance | ±10% (342 - 528 V) | ||||||||||
| Frequency Tolerance | ±5% (47 - 63 Hz) | ||||||||||
| Cooling Method | Natural cooling | Fan cooling | |||||||||
| Weight (kg) | 1.2 | 1.2 | 1.2 | 1.9 | 1.9 | 4.2 | 4.2 | 4.2 | 7.47 | 7.47 | 7.47 |
| Control System | SPWM (Sinusoidal Pulse Width Modulation) Control (V/F or sensorless vector control) | |
| Frequency Setting Resolution | 0.01 Hz | |
| Output Frequency Resolution | 0.01 Hz | |
| Torque Characteristics | Including the auto-torque/auto-slip compensation; starting torque can be 150% at 3.0 Hz | |
| Overload Endurance | 150% of rated current for 1 minute | |
| Skip Frequency | Three zones, setting range 0.1 ~ 599 Hz | |
| Accel/Decel Time | 0.1 to 600 seconds (2 Independent setting of Accel/Decel time) | |
| Stall Prevention Level | Setting 20 to 250% of rated current | |
| DC Braking | Operation frequency 0.1 ~ 599.0 Hz, output 0~100% rated current Start time 0~60 seconds, stop time 0~60 seconds | |
| Regenerated Braking Torque | Approx. 20% (up to 125% possible with optional brake resistor or externally mounted brake unit, 1-15hp models (built-in brake chopper)) | |
| V/F Pattem | Adjustable V/F pattern | |
| FrequencySetting | Keypad | Setting by up/ down key |
| External Signal | Potentiometer 5 kΩ / 0.5 W, 0 to +10 VDC, 4 to 20 mA,RS-485 interface; Multi-function Inputs 3 to 9 (15 steps, Jog, up/down) | |
| OperationSettingSignal | Keypad | Set by RUN and STOP |
| External Signal | 2 wires / 3 wires (MI1, MI2, MI3), JOG operation, RS-485 serial interface (MODBUS), programmable logic controller | |
| Multi-function Input Signal | Multi-step selection 0 to 15, Jog, accel/decel inhibit, 2 accel/decel switches, counter, external Base Block (NC, NO), auxiliary motor control is invalid, ACI / AVI / AUI selections, driver reset, UP/DOWN key settings, sink/source (=NPN / PNP) selection | |
| Multi-function Output Indication | AC drive operating, frequency attained, non-zero frequency, Base Block, fault indication, local/remote indication, auxiliary motor output, drive is ready, overheat alarm, emergency stop and status selections of input terminals (NC / NO) | |
| Analog Output Signal | Output frequency/current | |
| Alarm Output Contact | Contact will be On when drive malfunctions (1 Form C/change-over contact or 1 open collector output) | |
| Operation Functions | Built-in PLC, AVR, accel / decel S-Curve, over-voltage / over-current stall prevention, 5 fault records, reverse inhibition, momentary power loss restart, DC braking, auto torque/slip compensation, auto tuning, adjustable carrier frequency, output frequency limits, parameter lock/reset, vector control, PID control, external counter, MODBUS communication, abnormal reset, abnormal re-start, power-saving, sleep/wake function, fan control, 1st / 2nd frequency source selections, 1st / 2nd frequency source combination, NPN / PNP selection | |
| Protection Functions | Over voltage, over current, under voltage, under current, external fault, overload, ground fault, overheating, electronic thermal, IGBT short circuit, PTC, instantly stop and then reboot (up to 20 sec by setting parameter) | |
| Display Keypad | 6-key, 7-segment LED with 4-digit, 5 status LED, master frequency, output frequency, output current, custom units, parameter values for setup and lock, faults, RUN, STOP, RESET, FWD / REV | |
| Built-in EMC Filter | For 230 V 1-phase and 460 V 3-phase models | |
| Enclosure Rating | IP20 | |
| Pollution Degree | 2 | |
| Installation Location | Altitude 1,000 m or lower, keep from corrosive gasses, liquid and dust | |
| Ambient Temperature | -10 ºC to + 50 ºC (40 ºC for side-by-side mounting) Non-Condensing and not frozen | |
| Storage/Transportation Temperature | -20 ºC to 60 ºC | |
| Ambient Humidity | Below 90% RH (non-condensing) | |
| Vibration | 10 Hz≤ f≤ 57 Hz Fix Amplitude: 0.075 mm, 57 Hz≤ f≤ 150 Hz Fix Acceleration: 1 G (According to IEC 60068-2-6) | |
| Certifications | UL CE C-TICK | |
| Application | |
| "Textile Machinery"
*Knitting machine
*Cross weaver machine
*Ribbon weaver machine
*Round weaver machine
*Industrial sewing machine
|
| " Pape Machinery"
*Printing press | |
| "Metal Processing Machinery"
*Small lathe
*Milling machine
*Drilling machine
*Grinding machine
*Injection molding (clamp)
" Wood Working Machinery"
*4 side planer
*Spraying machine
*Wood carving machine
*Simple cutting machine for wood working |
|
|
 | " Fan Equipment"
*Air compressor
*Dryer's windmill
*Building air conditioning system
*Temperature control of mid and larger oven
* Heat exchange fanAir compressorAir compressor
|
| "Pump Equipment"
*Agricultural pump
*Water treatment pump
*Wastewater processing system
*Building water dispenser system
*Constant pressure water treatment system
| |
" Food Processing"
Food mixer
Noodle making machine
Dumpling making machine
| |
F&Q
Q . what's the payment term?
A. We accept T/T, L/C, D/P, CASH
Q . What's the delivery time ?
A. usually it will take about 5days after receive the payment
Q . What is the standard of package?
A. Export standard package or special package according to customer requirement
Q .Which market do you already sell?
A.We already ship to Europ, Middle East, South America, Asia, Afria etc.
Q. what kind of certificate you have ?
A.We have CE, UL. C-TICK.
Q. What information should be provided to get a clear model with quotaion?
A.Please directly provide input output voltage, power, applied machine, specific requested function in inquiry.
Call Us
| 93.3% Response Rate | |
|
20,000+ for 12 Transactions
The supplier’s transactions conducted via Alibaba.com in the past 6 months.
|