2. Support Multi-Language: Deutsch, English, Espanol, French, Portuguese, Italiano,Turkish, Nederlands.
3. Competitive price.
4. Have ST01 ST04 Adapter and OBD2 Cable in the Package
5. Have FTDI chip and 93C46 chip, have these 2 chips, the main unit supports connection with the PC, but we do not provide upgrade files.
1. Power-On Password: 1
2. Please Learn Basic Knowledge About Mileage Correction Before Order.
Digiprog 3 V4.94 Features:
Service Interval Adjustments and Settings
Fault memory read-erase
Integrated PC communication
Digiprog 3 How to use:
1.Turn off your engine and locate the "Function" button on the front of DigiProg III Mileage correction tool
2.Press and hold the "Function" button while turning the engine on. DigiProg III Mileage correction tool will now enter calibration mode.
3.Press the "Function" button repeatedly to scroll through the options until you come to "Auto."
4.Press and hold the switch until "-" is displayed. Release the switch when this appears. "Unit" will now appear on the display.
5.Wait until "Cal" appears on the display followed by zeroes, then drive your automobile until one mile clicks over on DigiProg III Mileage correction tool
6.Stop the car and then press and release the "Function" button. The mileage is now set.
Some Important Tips for Using Digiprog 3:
1. Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD).
2. Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.
3. Always keep your DigiProg in its case when not in Use & keep it in a dry environment at night (do not leave it in the trunk of your car) If you are using solvents to remove lacquers' from Eeprom's ensure that they are cleaned
4. completely as the solvent can damage the clips.
Digiprog 3 Menu:
1. EEPROM Menu
The first option on the main menu is the Eeprom menu. Reading, writing and saving Eeprom information is all done using this menu. A more detailed guide to using this menu follows later on in the introduction.
2. CAR / TRUCK Menu
This is the menu you will use for correcting and reprogramming vehicles. Manufacturers are set out in alphabetical order and models of vehicles are set out in a simple sub-menu format.
3. Motorcycle Menu
This menu is the same as the CAR / TRUCK menu but is used for reprogramming motorcycles.
4. Special Functions Menu
The special functions menu is for use only by official DigiProg dealers.
5. Setup Menu
This menu is where settings on your DigiProg can be changed. Language, password, brightness, volume, and the time / date can all be set and changed in this menu. You can also change whether your machine is working in kilometres or miles.
Using the EEPROM Menu:
On some of the vehicles you will come across, an eight pin Eeprom chip will be used to store the vehicle data. These chips hold vital information from the vehicle such as ignition and immobiliser codes. Loss of this information could result in anything from minor faults , to major faults involving the vehicle not starting and having to be taken to the main dealer. This is why it is very important to read and save the original information from the Eeprom before programming, this way if any errors do occur you can always return to the point you started.The process of reading and saving this information is very simple. The Eeprom chip itself will have a mask number printed across the top of it, for example a widely used chip is a 93C46. you can connect the chip to your DigiProg by using adaptor ST01 or ST04. Most chips are surface mount eeproms which will use ST01, but the larger DIL chips will use ST04.
Supported Model List:
For Alfa, For Aston, For Audi, For BMW, For Bentley, For Cagiva, For Chevrolet, For Chrysler,For Citreon, For Daimler Benz, For Ferrari, For Fiat, For Ford, For GM, For HARLEY, For Honda, For Hummer, For Hyundai, For Isuzu, For Jaguar, For Kawasaki, For Kia, For Lamborghini, For Lancia, For LDV, For Lexus, For Lincoln, For Mazda, For Mitsubishi, For Motor Cycles, For Nissan, For Opel, For Peugeot, For Porsche, For Renault, For Rover, For Saab, ,For Sang Yong, For Seat, For Skoda, For Smart, For Subaru, For Susuki, For Toyota, For Vauxhall, For Volvo, For VW, For Wiesmann, For Yamaha
Details car models list, Contact sales service....
Packaging & Shipping
1pc x Main unit of Digiprog III V4.94 with OBD2 ST01 ST04 Cable
1pc x Power Adapter
1pc x CD
45pcs x obd2 adapter cable
Carton box packing, or OEM as your request:
Q1. Can I have a sample order? A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time? A: Sample needs 3-5 days.
Q3. Do you have any MOQ limit? A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive? A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order? A: Firstly let us know your requirements or application. Secondly We quote according to your requirements or our suggestions. Thirdly customer confirms the samples and places deposit for formal order. Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product? A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 1 year warranty to our products.
Q8: How to deal with the faulty? A: Our products are produced with strict quality control system (if the problem occurs, the product can be replaced free of charge)