All-in-One Machine, Whole Machine Delivery
Pallet and Wooden case is optional
1 - 1
2 - 5
To be negotiated
Dry Fish Food Dryer Machine Heat Pump Dryer For Seafood
The working fluid of heat pump is compressed by compressor and becomes high temperature and high pressure gas. It enters the condenser and condenses liquefaction to heat the air in the drying room, so
as to improve the temperature of the drying room.
The water in the material is vaporized and evaporated by hot air, and the evaporated water vapor is discharged from the dehumidification system to achieve the purpose of drying the material.
The dehumidification system has a heat recovery device. The heat recovered can be used to heat fresh
air, which can save 60% - 70% of the energy consumption of fresh air preheating.
Environmental Protection :There are no three wastes (waste water, waste gas and waste residue) in the operation process.
Energy Conservation: The power consumption is only one quarter of that of electric heater. Compared with coal, oil and gas driers, it can save about 60% of the operating cost. One kilowatt-hour is equal to four kilowatt-hour.
Simplicity:Large-scale integrated machine, before leaving the factory to complete multi-channel testing, power is ready to use, easy to move.
Intelligent: Fully automatic operation, no need of special care. PLC intelligent programming control, support 10 stages of intelligent process control Settings, easy to operate, accurate temperature and humidity control.
High efficiency : The main engine and drying oven are designed with frame polyurethane thermal insulation board, industrial seal, and the loss of drying gas flow process is minimized. Professional negative pressure air distribution design, to maintain the color, fragrance, taste, shape of materials
Clean:All SUS304 stainless steel inner plate of main engine, dryer and air distribution system is designed with good corrosion resistance, which is more durable under high temperature and humidity operation environment, and eliminates harmful substance residues in rubber and plastic insulation.
Run Contrast Analysis Table:
According to the relevant authoritative literature, the average heat required to remove 1 kg of water is 1.35 kWH, is about 1161 Kcal.
Oil Fired Boiler
Natural Gas Boiler
Conventional air source heat pump + Electricity fees
JIMU Heat Pump
Effective Calorific Value
Unit Price Of Fuel
Running Expense ($)
Artificial Management Cost
Service life (Years)
Packaging & Shipping
A. Payment service 1. T/T 2. L/C (Negotiable ) 3. Paypal (for sample order & parts)
B. Technical service 1. We provide drying scheme design and recommend the best models. 2. Sample test before place the order. You can send us your product, we will help you dry it for free and
send you the feedback.
3. We supply you the professional technical support and electronic technical support for your installation, debugging and operation.
4.Safety test and performance testing before the machine shippment.
5. We supply the spare parts and technical support in & after the warranty time. 6. We supply the training course to your workers at our factory if you need.
C. After-sales service 1. Technical support for your installation, debugging ,operation and maintenance. 2. One year’s warranty, and you can pay for extended warranty. 3. Spare parts and technical support at most economic prices after the warranty.
E. Why Choose Us? -- Best Quality Core Components
Adopt international famous brand Copelandhigh efficiency scroll compressor Advantage: High efficiency, Low noise, Stable
Use of High Temperature and Humidity Resistant Axial Flow Fan and Circulating Fan Advantage: Uniform air flow, Safety of operation under high temperature and humidity
Microcomputer PLC automatic control, 7 inches large touch screen Advantages: clear display, temperature control, simple operation
Schneider electric components,Ensure the whole process of stable and safe operation of the unit
All use 304 stainless steel internal insulation board,keep the machine clean and hygienic
The Famous Brand Name
Three-flowerelectronic expansion valve, four-way valve Advantages:Small energy consumption, small volume
Efficient Heat Transfer
Hydrophilic aluminum foil heat exchanger Advantages: better heat transfer effect, improve the performance of the unit
High efficiency heat exchange reclaimer Advantages:Energy saving, energy recycling
Established in 2002, Guangzhou Jimu Energy Storage Technology Development Co. Ltd. is located in LangQing industrial center of Taishi industrial estate in Nansha district, Guangzhou, which is the nearly developing center of China.
JIMU is a company devotes itself not only to green energy intellectual dehumidifying drying machines but also to system development, products manufacturing and services.
Providing customers with the most convenient and energy-saving dehumidifying drying cold and heat pumps Is JIMU's main company target. After a series of experiments based on users' requirement of dehumidifying heat pump system as well as its convenience and energy-saving property while installation and operation, we successfully invented some kinds of drying devices. Such as drying heat pumps, dehumidifying heat pumps, temperature impact compound type cold drying machine and sludge dryer, which are profoundly in Energy& Equipment comprehensive utilization.Thus, we can insure you the efficiency and convenience in both installation, operation and running.
In the future, JIMU will positively respond to Chinese national strategies, to provide our society with cold and heat source equipments which perform better in energy-saving and environmental territories. We promise to keep health and harmony in the philosophy of our company.
Q1: Are you a factory or trading company? We are a specialized manufacturer dehydrator machine for more than 16 years. We have own brand drying machine production line.
Q2: Where is your factory located? Our factory is located in Guangzhou, Guangdong province, China, welcome to visit!
Q3: How is the quality of your products? Our products are manufactured strictly according to national and international standard, and we take a test on every food dehydrators before delivered out. We have got certifications and all kinds of the testing report; if you want please just ask us for it.
Q4: What is the MOQ? The MOQ is 1 unit.We suggest using Alibaba Trade Assurance to protect your orders from payment to delivery.
Q5: What about your packages? The goods are packing in new strong standard wooden cases. We have been exporting lots of products the overseas, no any clients make any complaints about our packages. Please contact us and we will send photos to show you the details of our secure packages.
Q6: What is the delivery time? For the regular equipment, the delivery will be 18-20days. For customized drying production line will be further negotiated with us.
Q7: What about the Warranty? We are committed to every machine before delivery through professional commissioning debugging to ensure that the machine is best for you. And solemnly promise you can machine warranty for two years, Long-term to provide the after-sale spare parts service cost price.
Q8: Can I be your agent? Yes, if you want to become our distributor in your place, we are a pleasure that we share profits and cooperate.
Q9.Why are Heat Pumps better than other forms of heating? Heat pumps offer many benefits over other forms of heating. Firstly they are much cheaper to run giving up to 4 times more heat than you pay for, they can be used all year round for heating and cooling. They don't pollute our atmosphere because they use ozone friendly refrigerants.