Specifications subject to changes without prior notice.
As a rotor dehumidifier, its main components for the core - honeycomb constantly rotating silica gel wheel, wheel made of special ultra-efficient absorbent dielectric material, and over 40 synthetic multi-channel processing technology. Rotor is a special honeycomb structure, having equidistant, parallel, uniform air passage. Thus, the runner only has a huge surface area in contact with the air, while improving the efficiency of the rotor of the absorbent.
Rotor dehumidifier in part by the sealing plate surface divided into 90 regions and dehumidifying the regeneration of the area 270 degrees, slowly rotating desiccant wheel 8 to 10 rotations / hour, in order to ensure that the entire dehumidification is a continuous process.
When the process air through the treatment zone runner, in which the water vapor is adsorbed runner in the absorbent media, while steam phase transition into a liquid, and releases latent heat; At this point, the process air due to their own reduction of water into dry air; after treatment by the process air blower sent into the dry, hot air.
Meanwhile, in the regeneration zone, the other way after the first regeneration air heater, air at high temperature (generally 100 to 140 degrees) and through the runner after moisture absorption, a moisture adsorbed in the rotor evaporated to regeneration due to evaporation of moisture and air becomes wet air, while the temperature drops; after regeneration the fan through the humid air to the outside excluded.
Regeneration air (usually taken from outdoor or room) heated to reach 100-130 ℃, the reverse blown regeneration zone. Moisture is adsorbed on silica gel has a water vapor desorption, as the regeneration air blower is discharged, thereby completing the transfer of water from the system to the outside of the system. After the runner regeneration restored absorbent capacity, into the sector again dehumidification dehumidifier.
Said dehumidification and regeneration processes occur simultaneously, again and again, to ensure that the dehumidifier steady state.
1. We can provide OEM service for customers.
2. We produce according to customers' requirements.
3. Factory visitting.
4. General testing and operational test carried out for every unit before delivery.
How about the quality of your product? -- Our products manufactured strictly according to national and international standard. -- We have CE ,ISO certification -- We take a test on every product before delivery.
How about price of this product?
-- We can give the lowest price than market one. -- We do quotation as soon as possible for any customer. -- Discount can be given according to quantity.
What is the MOQ?
-- 1 set.
Can you do custom-made machines? -- We can make products according to customer's requirements.
What is the voltage and refrigerant?
-- standard chiller usual use 380V/3phase/50HZ and refrigerant. -- Custom-made chiller use other voltage and refrigerant by according to client's requirement.
1. Payment Terms: T/T - 30% deposit before production,70% balance before delivery, or other terms
2. Delivery Detail: About 30 workdays after payments.
3.Pacage Terms: International Standard Wooden Case for Export.