5kgs per bottle
20kgs per carton
20kgs per barrel
200kgs per barrel
1 - 10
To be negotiated
618AB-H is a two components polyurethane system with the mixing ratio of 1:1, can be cured
under normal temperature and high temperature, it forms a very high gloss and transparent coating.After cured, it will has a very good features of UV resistance and weather resistance, can be for outdoor use, and can meet the strict requirements for car raw materials, will not yellowing for about 3 to 5 years for outdoor use.
618AB-Hcan be widely used for coating on nameplate, signage,wallstickers and decorations. etc...
Properties before Hardening:
Transparent or light yellow
Transparent or light yellow
Viscosity (25℃ mpa·s)
A: B = 100:100(weight ratio)
25 ℃×24H or 65℃×3.5H or 80℃×2H
Shelf life(25℃, sealed)
1, Place 618A-H and 618B-H at the temperature of 15 to 25 ℃, relative humidity lower than 70% for 12hours.
2, Well prepared the products you need to apply the 618AB-H such as the PVC signage/nameplate, metal signage/nameplate, put them into the oven to heat at the temperature of about 60℃ to clear the moisture on the surface.
3, Totally clear the dust and the oil on the surface of the signage/nameplate.
4, Weigh the 618A-H and the618B-H by 1:1, and fully stir it.
5, Clear the bubbles by vacuum machine(the mixture will not have bubble at the -0.1 vacuum)
6, Take a clean syringe to draw the mixture and drop it to the surface of the well prepared signage/nameplate. Normally the thickness is 2mm.
7, Look at the glue in 5 minutes, if there is some bubbles, use a pin to break the bubbles, or if there is some area that has not been covered by glue, use the pin lead it.
8, Put the finished products in the oven at the temperature of about 60 to 80℃, it will cured in 2 to 3.5 hour.
Properties after Hardening:
Hardness, shore A
Elongation Ratio, %
Shenzhen Jinhua Electronic Materials Co., Ltd. is specialized in epoxy resin and hardener with Secondary processing of high-tech enterprises.It is one of the most professional supplier of epoxy resin adhesive in current.And it is the most competitive, our company integrates R&D,development, production, sales and service into one of the professional firms. It has a more than 2000 square meter factory at pressent. Equipment introduction adopts international advanced technology and standards. Refer to excellent formula domestic and abroad, with high-performance raw materials in the United States, Japan, Germany and other places. All aspects of production have been strictly performance, environmental protection, health indicators test, and through the national authorities to detect certification,meet in the domestic industry-leading level.
Our company mainly produces crystal glue, epoxy resin adhesive, electronic potting glue, solar accessories, board resin glue, adhesive and other special grinding and etc...
Our company all stuff will uphold "honesty, harmony, innovation, rigorous" enterprise culture, adhere to the "management step by step, the eternal development" concept, constantly strive to forge ahead, innovation, all for customer needs as the center; all customers for the development of power; all customer satisfaction as the starting point; Jinhua hand in hand together with you, create brilliant!