For 6300W CMH Fixture, usually 1pcs in a Carton, All the cartons will be protected by strapping.
1 - 1
2 - 500
To be negotiated
1.Supply to USA,Europe. 2.Lucius 630W CMH Fixture , Input 630V, Suitable for 2*315W SE Ceramic Metal Halide lamps only. 3.Guaranteed high output & consistent spread . 4.Incredible par output, replaces 1000W HID systems
5.High efficiency super reflective horticultural aluminum.
This revolutionary feature, unique to our products, makes Lucius Series Digital Ballast the safest and most reliable ballast when used in automated multiple lamp applications. When multiple units are connected to the same mains circuit, our integrated Ignition Control software will completely balance the electrical draw by igniting one lamp at a time to prevent electrical surges and spikes that can overload the mains circuit and trip circuit breaking systems. For further efficiency, this feature is activated alongside our 'Soft Start Technology'.
Full Circuit Protection.
The Lucius Series Digital Ballast uses a sophisticated software controlled circuit breaking system that is not seen in other manufacturer's ballasts. The system protects against a series of faults including: Open Circuit Protection, Short Circuit Protection, Over Voltage Protection, Under Voltage Protection and Over Temperature Protection. On Ignition the ballast performs a 3 second test of the circuit and in the event of a fault the ballast will go into protection mode to avoid damage to the ballast and lamp.
Soft Start Technology.
Soft Start Technology prolongs lamp life by stopping current rush to the lamp and preventing lamp overload. When the ballast is started from cold there will be a 3 second fixed delay before ignition. After ignition there will be a series of random 0-2 second delays before full brightness is reached after approximately 3-5 minutes. SoftStart Technology is also activated when increasing and decreasing power to the lamp using the 'Smart-Step' feature.
Re-Strike of Hot Lamp after Mains Failure:
The Lucius Series Digital Ballast uses a timed re-strike system that prevents the ballast from re-striking a hot lamp after a power failure. If a hot lamp is detected, the re-strike will be delayed for 60 second intervals until the lamp has cooled sufficiently to be re-ignited. Re-ignition is then controlled by 'SmartStart Ignition Control' and 'Soft Start Technology' software.
Shenzhen Jayo Technologies Co., Ltd. is located in the so-called "China Silicon Valley"-Shenzhen, China. Our company has gained extreme success from the USA investors and close relationships with some of the top electronic companies in China, such as Shenzhen Electronics Group, one of the largest public entities in China. With great support and top engineers working on R&D for our company, our company has the potential to be one of the leading suppliers in providing both PCB and finished product solutions for all types of intelligent control boards and systems.
Presently, our company manufactures and produces products including but not limited to household appliance PCBA boards, HID ballasts, LED drivers and power supply units. Currently, we have top notch engineers from esteemed universities and two NASA engineers from the USA. With such a strong R&D and engineering department, we can easily make any idea into a reality. We offer full hardware layout, design, software coding and manufacturing services.
R&D Capability We have a powerful R&D team including 25 engineers and 10 senior engineers with 5-10 years'experience.Therefore,our design's reliability can be insured and the development cycle can be shorted.with a range of multiple testing machines from brands like Tectronix, Agincent, Fluck, Lecroy, Prodigit.The dats's accuracy can also be insured.
100% Professional Aging testing for high quality
For all ballasts, we should do aging testing twice. The first time is before pouring resin, it will be 12 hours. After resin, again we should do the second aging testing, it will be 12 hours too.
During the aging testing time, every half an hour the workers will make ON/OFF testing, every time they will make 10 times ON/OFF testing to check the surge to the ballasts.
Packing & Delivery
Transport of large trucks to the seaport
Transport of large trucks to the seaport
1. OEM Manufacturing welcome: Product, Package, we can produce by your samples or technical drawings. We can build the molds and fixtures. 2. Sample order . 3. We will reply you for your inquiry in 24 hours. 4. after sending, we will track the products for you once every two days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.
Q1.Are you manufacturer or trading company ?
We are professional lighting manufacturer in China and golden supplier on Alibaba.
Q2.Are you familiar with export business and which counties do you sell to currently ?
We are very familiar with export business and over 80 counties import from us until now.
Q3. What is your terms of packing? A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q4. What is your terms of payment? A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q5. What is your terms of delivery? A: FOB.
Q6. How about your delivery time? A: Generally, it will take 45 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q7. How to order ? Step 1 : Pls tell us application, model, quantity and the request. We quote you detailed prices. Sample can be sent or special design for you if needed.
Step 2 : Proforma invoice confirmed, the order will be arranged upon receipt of you payment.
Step 3 : Confirm and ship the goods. Then tracking numbers will be sent by e-mail for air shipment.
B/L and other documents shall be sent to you for sea transportation.
Step 4 : We will help to track the goods and provide kinds of clearance documents until you receive them safely.
Q8. What is your sample policy? A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q9. Do you test all your goods before delivery? A: Yes, we have 100% test before delivery.
Q10: How do you make our business long-term and good relationship? A:1. We keep good quality and competitive price to ensure our customers benefit ; 2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.