High Quality Sanitary Food grade stainless steel oil storage tank
oil storage tank
oil storage tank series strictly tally with GMP General principles'(1998 Revised Edition),
and is designed ,manufactured and accepted according to the requirements of GB150-98 Steel Pressure Vessel or JB/T4735-97 Steel Welding Normal Vessel.
1 oil storage tank 's .Heat preservation material of the vessel adopt high-temperature resistant and anti-aging polyurethane blister or per cotton. 2.Joints adopt international general ISO package chuck,inner container adopts imported stainless steel SUS 304 or SUS316 ,internal surface polishing.
3.Orifice is set with level gauge (static-Pressure type,capacitance type,non-contac type ,ultra-sonic type and glass tube), air respirator,thermometer (digital display type or dial plate type), CIP cleaning mouth , SIP sterilizing mouth, liquid entrance-exit gate and sanitary inlet.
4. Oil tank Volume Specification:100L-30000L or to be designed and manufactured at customers'actual request
According to your product, we can configure with different mixing tool, if low viscosity product, need high speed mixer, if high viscosity product, usually high speed mixer with low speed mixer to meet different process.
To choose the right machine will greatly advance your production efficiency and production quality.
The stainless steel mixing tank can engineer heating, cooling or vacuum or other process
we have rich practicel data for different product, with the data can help customer to choose the right machine.
The volume of the mixing tank from 50-10000L
Material: sus304 or 316L stainless steel
the closed structure prevent the dust fly or liquid splash.
Jhenten Quality Control for oil storage tank:
1.The raw materaial plate was anlysised by our material anlysier to assure the quality
2.The welding is argon arc weld(TIG) to avoid plate's oxidized
3.After welding the the inner tank ,we will make a full water pressure test to check the welding joint .After welding the jacket ,the full water pressure test be done for jacket too
4.After finishing the surface finish ,our people will make a surface roughness testing to assure the Ra data .
5.After agitator installment ,we will operate it to assure the function is good .
6.The nozzle's position 's confirm also is checked by our quality control people .
oil storage tank parameters
SS304 or SS316L or Duplex stainless or 904L
-1 -10 Bar (g) or ATM B9
Vertical type or Horizontal type
Jacket type :
Dimple jacket, full jacket, or coil jacket
Single layer vessel, vessel with jacket, vessel with jacket and insulation
Heating or cooling function
According to the heating or cooling requirement ,
the tank will have jacket for requried function
ABB, Siemens, SEW or Chinese brand
Mirror Polish or Matt polish or Acid wash&pickling or 2B
Standard components :
Manhole,sight glass , cleaning ball
Optional components :
Vent filter, Temp. Gauge, display on the gauge directly on the vessel
Temp sensor PT100, digital display on the control cabinet by instrument
Temp sensor with control for heating and cooling Level gauge with digital
display on the control cabinet by instrument Load cell Valves