High frequency wood dryer,vacumm kiln dryer for mahogany furniture
How it works?
High Frequency Wood Vacuum Dryeris the new generation woodworking drying machine,The frequency of HF generally in 6.78-13.56Mhz,for hundreds of mm thickness of the wood can achieve uniform heat internal and external. uniform heating, high speed drying, short time and good quality, which can keep the timber nature color, meanwhile, the timber is aerated under the vacuum environment, non-cracking, especially applied for the thick and hard precious wood, wet wood.
Why should you care?
Drying fast increases throughput, inventory turnover ans cash-flow. Drying fast with excellent color.Without bending & cracks.
The high frequency Lumber Vacuum Dryer increases yield. Yield=$$$$$$.
1.It is new drying method. (Dielectric heating)
Steam and normal vacuum dryer (hot plate) is conductive heating. They dry the wood little by little from outside to inside.
High frequency is dielectric heating. HF wave can penetrate the thick wood and dry it uniformly. Even the core of wood temperature is heater than surface.
Vacuum condition: It is minus pressure, safe.
The wood moisture can vaporized in low temperature.
Then vapor will be pump out automatically. So HF vacuum dryer is faster, more uniform, no bending and no crack caused by non-uniform.
2. No need boiler; No need hot plate (no hot water)
The power supply of HF vacuum dryer is electricity. It does not need boiler, save the human resource and protect the Environment.
3. Worm killing.
High frequency can kill the worm and bacteria. It does not need special chemical treatment.
4. Applications of DXHF vacuum dryer
Normal solid wood;
Rose wood,hard wood, verawood,red sandalwood, large square beams etc.;
Thin plane cutting board,peeling veneer floor
5. PLC control
Fully automatically High frequency vacuum wood dryer is advanced design.It has all the advantages of high frequency vacuum dryer.
At the same time,there are following updated characteristics.The whole wood drying process is fully auto controlled by PLC.Kind of sensing methods to monitor lumber drying process,which can guarantee safety and quality of wood.integrated and humanized design,convenient operation,clear recognition system.Scores of drying progarm data for choosing to help operator find the best solution.
The Specifications of GZ-3.0III-DX Wood Dryer Kiln
High Frequency Vacuum Wood Dryer Machine
Type of work:
high-frequency heating, vacuum dehydration
3.3 cubic meter
Total input power:
All kinds of wood
Depending on the technology needs
Max Length of Wood:
The result of drying by High Frequency Wood Dryer Kiln
Packing:standard and pubic export packing or as the csustomer' requirments.
Shipping:within 20 days.
Our engineer will install all parts for buyers, the buyer can use it directly when they get the machine.
Introduction book inside.
Sample:we can provide free brochures to cutomers.
Warrenty:all kinds of mahines can be ensured 1 year.
Cutsomer service:If there were something wrong during this warrenty, our engineer would be available to oversea to repair it freely.