High quality/power/efficiency ip66 led solar street light all in one
LED Street Light
AC 90-305V potted with multi protections
Driver conversion efficiency:
Mount pole OD:
34 to 76mm
Die cast aluminium with corrosion resistant coating
Lamp Body Material:
LED Light Source:
Lamp Luminous Efficiency(lm/w):
20000 Piece/Pieces per Month for ip66 led solar street light all in one 80W
Packaging & Delivery
Anti Vibration Carton 550*400*155mm for High quality/power/efficiency ip66 led solar street light all in one 80W with factory price
China Sea & Airports
2-4 weeks for ip66 led solar street light all in one 80W
1. MAIN APPLICATION
High quality/power/efficiency ip66 led solar street light all in one 80W with factory price is mainly application of road and area lighting to highways, urban main roads & branch roads, country roads, factory outdoor roads, residence outdoor roads and etc.
2. DESIGN STANDARD
AS NZS 1158.0-2005Lighting for roads and public spaces - Introduction
AS NZS 1158.3.1-2005Lighting for roads and public spaces - Pedestrian area (Category P) lighting - Performance and design requirements
AS NZS 1158.6-2010 Lighting for roads and public spaces - part 6: luminaires
AS NZS1158.1.2-2010Lighting for roads and public spaces - Vehicular traffic (Category V) lighting - Guide to design, installation, operation and maintenance
EN 60598-2-3Luminaires; part 2: particular requirements; section 3: luminaires for road and street ligthing
EN 62778Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires
EN 62471 Photobiological safety of lamps and lamp systems
EN 62493Assessment of lighting equipment related to human exposure to electromagnetic field
EN 55015Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
EN 61547Equipment for general lighting purposes - EMC immunity requirements
EN 61000-3-2Electromagnetic compatibility (EMC). limits. limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
EN 61000-3-3Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
EN 60598.1Luminaires - Part 1: General requirements and tests
3. STANDARD CHARACTERS
High brightness LEDs, CRI RA>70, 90 to 130lm/w & 2700-10000K selectable
Industrial grade design, zero pollution, zero glare, even light distribution>0.95
Power factor >0.95, total harmonic distortion <10%
AC90 to 305V wide application potted dirver with multi protections of short circuit, open circuit, zero load, over load, electron magnetic inteference
Dual stage built-in surge protector 6KV and 10KV
Aesthetical architecturelly design and make up of corrosion free high pressure die cast aluminum with well design of thermal managment system
IP66 ingress protection to both optical and control gear compartment
Tool free mounting with level gradienter, NEMA interface reserved
Long maintenace free life, 50,000 hours for whole luminare
4. STANDARD SPECIFICATIONS
SL112 General Specification
90 to 305V AC
Luminary Efficiency (lm/W)
-40 to 55
-50 to 60
Service Life (H)
corrosion free high pressure die cast Aluminium with silver colour corrosion resistant coating+PC
lateral or vertical
Φ34 to Φ76
Production and Test
Q1. How to order a standard luminare?
Please specify order code, correlatted color temperature(CCT).
Q2. What need to be supplied to engineering for a perfect lighting solution?
Please send us parameters of mounting height, road width, mounting distance, even lux for our professional engineering and proposal of luminare with correct light distribution curve to guarantee even road & area distribution
Q3. How to realize intelligent control of each luminare?
One patent zigbee photoelectrical controller can be mouned on each single luminare(NEMA interface reserved for Europe style); wirelessly communicate to field node controller which communicate with central control room(CCR) via Internet.
Q4. If there is deviation to our standard specifications, what else can be customized make to order(MTO)?
a. LED chips: Standard is our self packaged type, but can also customized from Cree who is our strategic partner.
b. Luminous flux: If rated flux is not in standard specification, please contact us for (Make to Order) MTO solution or propose our replacement series.
c. Solar system: solar panel, GEL battery, inverter and charge controller which compose of whole self-support power system can ordered and mounted separately by our Make to order (MTO) engineering. We have a branch company specialize in solar power stations with high technolgy.
d. Mounting pole: We can help design and outsource galvanized and alloy pole from our sub vendors.
Q5. What certificates have been approved for SL112?
SL112 is awarded CE, SAA, CB and RoHS, please consult us for your specific requirements.
Q6. Do you supply OEM service?
Yes, please consult us for your specific requirements.