Twelve 10/100/1000BASE-T ports,twelve 100/1000Base-X ports,two 10GE SFP+ ports (10GE/GE auto-sensing) • One AC power module,external RPS • Forwarding performance: 66Mpps
The S5700-SI series are gigabit Layer 3 Ethernet switches based on new generation of high-performance hardware and Huawei Versatile Routing Platform (VRP). It provides a large switching capacity, high-density GE interfaces, and 10GE uplink interfaces. With extensive service features and IPv6 forwarding capabilities, the S5700-SI is applicable to various scenarios. For example, it can be used as an access or aggregation switch on campus networks or an access switch in data centers. The S5700-SI integrates many advanced technologies in terms of reliability, security, and energy saving. It employs simple and convenient means of installation and maintenance to reduce customers' OAM cost and help enterprise customers build a next-generation IT network.
(1)Comprehensive reliability mechanisms
The S5700-SI supports Ethernet Ring Protection Switching (ERPS), also referred to as G.8032. As the latest ring network protocol, ERPS was developed based on traditional Ethernet MAC and bridging functions and uses mature Ethernet OAM function and a Ring Automatic Protection Switching (R-APS) mechanism to implement millisecond-level protection switching. ERPS supports various services and allows flexible networking, helping customers build a network with lower OPEX and CAPEX.
(2)Easy deployment and maintenance free
EasyDeploy: The Commander collects information about the topology of the client connecting to the Commander and saves client startup information based on the topology. The client can be replaced without configuration. Configuration and scripts can be delivered to the client in batches. In addition, the configuration delivery result can be queried. The Commander can collect and display power consumption on the entire network.
The S5700-SI PWR can use PoE power supplies with different power levels to provide -48V DC power for Powered Devices (PDs) such as IP phones, WLAN APs, and Bluetooth APs. In its role as Power Sourcing Equipment (PSE), the S5700-SI PWR complies with IEEE 802.3af and 802.3at (PoE+) and can work with PDs that are incompatible with 802.3af or 802.3at. Each port provides a maximum of 30 W power, complying with IEEE 802.3at. . This facilitates the use of PDs. PoE ports can work in power-saving mode. The S5700-SI PWR provides improved PoE solutions. Users can configure whether and when a PoE port supplies power.
(4)Various IPv6 features
The S5700-SI supports IPv4/IPv6 dual stack and can migrate from an IPv4 network to an IPv6 network. S5700-SI hardware supports IPv4/IPv6 dual stack, IPv6 over IPv4 tunnels (including manual tunnels, 6to4 tunnels, and ISATAP tunnels), and Layer 3 line-speed forwarding. The S5700 can be deployed on IPv4 networks, IPv6 networks, or networks that run both IPv4 and IPv6. This makes networking flexible and enables easy migration from IPv4 to IPv6.
24×10/100/1000Base-T ports, 4 of which are dual-purpose 10/100/1000 or SFP
48×10/100/1000Base-T ports, 4 of which are dual-purpose 10/100/1000 or SFP
The S5700TP provides one extended slot for a stack card
The S5700-28C and S5700-52C provide two extended slots, one for an uplink subcard and the other for a stack card.
MAC address table
IEEE 802.1d compliance
16 K MAC address entries
MAC address learning and aging
Static, dynamic, and blackhole MAC address entries
Packet filtering based on source MAC addresses
Guest VLAN and voice VLAN
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports
1:1 and N:1 VLAN Mapping
RRPP ring topology and RRPP multi-instance
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover
STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s)
BPDU protection, root protection, and loop protection
Static route, RIPv1, RIPv2, RIPng, ECMP
Neighbor Discovery (ND)
Path MTU (PMTU)
IPv6 ping, IPv6 tracert, and IPv6 Telnet
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type
MLD v1/v2 snooping
6to4 tunnel, ISATAP tunnel, and manually configured tunnel
IGMP v1/v2/v3 snooping and IGMP fast leave
Multicast forwarding in a VLAN and multicast replication between VLANs
Multicast load balancing among member ports of a trunk
Port-based multicast traffic statistics
User privilege management and password protection
DoS attack defense, ARP attack defense, and ICMP attack defense
Binding of the IP address, MAC address, interface, and VLAN
Port isolation, port security, and sticky MAC
Blackhole MAC address entries
Limit on the number of learned MAC addresses
802.1x authentication and limit on the number of users on an interface
AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC
Hypertext Transfer Protocol Secure (HTTPS)
Blacklist and whitelist
802.1x authentication, MAC address authentication, and combined authentication on a per port basis
Portal authentication on a per VLANIF interface basis
Management and maintenance
Stacking (not supported by S5700-26X-SI-12S-AC)
MAC Forced Forwarding (MFF)
Virtual cable test
System logs and alarms of different levels
Supports VBST (Compatible with PVST/PVST+/RPVST)
Supports LNP (Similar to DTP)
Supports VCMP (Similar to VTP)
Operating temperature: 0OC–50OC
Relative humidity: 5%–95% (non-condensing)
Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 50/60 Hz
Rated voltage range: –48 V to –60 V, DC Maximum voltage range: –36 V to –72 V, DC
Note: PoE-support switches do not use DC power supplies.
Dimensions (W x D x H)
S5700-24TP-SI: 442 x 220 x 43.6 mm
S5700-26X-SI-12S-AC: 442 x 310 x 43.6 mm
Others: 442 x 420 x 43.6 mm
Non-PoE model: < 40 W
PoE model: < 455 W (PoE: 370 W)
Non-PoE model: <56W
PoE model: <836W (PoE: 740W)
Non-PoE model: < 64 W PoE model: < 907 W (PoE: 740 W)
Non-PoE model: <78W PoE model: <917W (PoE: 740W)
Packaging & Shipping
ChuCheng Information Technology Co., Ltd. , which provides main services in terms of broadband communications and information technology industries, is a research and development, production, sales, service integration, high-tech enterprises. Our products mainly cover the optical signal transmission and access, signal transmission and access, photoelectric signal conversion and photoelectric signal and so on.
We are now the agent of well-known international brands such as HUAWEI, ZTE, CISCO, ADVA,EMC,F5, Grandstream, etc. Our customer include major national telecom carriers, as well as radio and television, electricity, mining and other industry professional network users; We have already established a long-term friendly and cooperative relations with them. In addition, the company has been actively expanding into foreign markets. The products are exported to Europe, America, Southeast Asia, the Middle East as well as Japan, Korea and other neighboring countries. We will constantly improve our service and quality to create a win-win situation. Please contact us to know details.
We can provide detail documents and remote help for device installation and configuration.
Warranty: 1 year. ( After the quality guarantee period began to charge appropriate maintenance service fee.)
Our company promises goods enjoy full return due to quality problem since goods delivered within 7 days or 15 days , returned goods must keep original state and it’s accessories are complete.