Plastic bag+individual color box+carton+pallet, or according to customers' requests
Xiamen Port or As request
Long life plastic UCFPL208 stainless steel ball bearing blocks
The Detailed Dimension of UCFPL200 Series Flanged Bearing Units
Finished Products Pictures
The Tolerances for Flange Type Housings
The The Limiting Rotational Speed(RPM)
The limiting rotational speed of the mounted ball bearing untis mainly depends on the fitting between the shaft and the bearing. It is recommended that, under normal operating conditions, the fitting between the bearing and the shaft be H7. And the relevant RPM details are shown on the below table. Loose fitting is suitable for lighter load products which allow lower limiting rotational speed. On the contrary, Heavy load products which require higher limiting rotational speed should choose tight fittting named J7 fitting.
UC HC SA SB UCX CSA CSB SER UK
The Mounting Method of Housings
The correct installation order is: first install the housing, then the shaft and the bearing.In principle, the bearing units can be easily installed at any place. However, in order to have a long service life,the mounting base should be flat and rigid.
For pillow block type and flange type housings, the parallelism tolerance between pillow block housing' mounting base to the shaft and the squareness tolerance between flange housing'mounting base to the shaft should both keep within ±2°. Same as the below picture:
1) Thermoplastic bearing housing with stainless steel bearings: SUCP200 white / black / blue+ OC / CC, SUCF200 white/black/blue + OC / CC, SUCFL200 white/black/blue + OC / CC, SUCT200 white/black/blue+ OC / CC
2.FSZ Thermoplastic Bearing housings Waterproof Series
Waterproof housing :
The waterproof sealing system guarantees protection of the bearing from the external environment.
Corrosion resistance,Resistance to food &liquid contaminants adapt to frequent washdowns and low weight element helps to meet your particular engineering demands.
To be assembled with chrome steel or stainless steel insert bearings to meet your particular budget and performance needs.
3.FSZ Thermoplastic housings
FSZ Thermoplastic housings are specially designed to meet particular engineering demand for food ,beverage photo, and the chemical industries. The maintenance and the corrosion resistance characteristics as well as a low weight element has proven to stand the hard working conditions for all needed application.
FSZ Thermoplastic housings can be delivered with Chrome steel bearings inserts black oxided inserts or stainless steel inserts for maximum corrosion resistance.
FSZ Thermoplastic housings are designed to meet important engineering demand for:
-- Frequent washdowns
-- Exposure to harsh chemicals
--Exposure to high humidity
--Operating temperature -35°C to 102°C
FSZ thermoplastic housings can be delivered with food approved grease to any specification. Please contact your local distributor for your grease specification requirement.
Because of their corrosion-resistant and non-magnetic properties. FSZ thermoplastic housings are used in a wide variety of industries:
-- Food processing
4.FSZ Anti-Bacterial protection series
1.Set Screw or Eccentric locking color shaft locking.
2.Solid base design: ideal for sanification.
1.Housing in reinforced platic polymer(PBT/PA/PP)with anti-bacterial protection additive
which is effective against most of the common bacterial that may grow in foodstuff like
E-coli, Salmonella etc.
2.Protection caps in reinforced PP polymer with anti-bacterial protection additive which is effective against most of common bacterial that may grow in foodstuff like E-coli, Salmonella etc.
3.Seal and O ring in NBR rubber. On request supplied in Viton rubber.Viton material offers high resistance to chemical agents.
4. Grease nipple in stainless steel AISI316.
5.Seamless bushing on mounting holes in stainless steel AISI 316.
Anti-Bacterial protection plastic housings with stainless steel insert bearings:SUCP205
Anti-Bacterial protection plastic housings with chrome steel insert bearings:SBP205
FUJIAN FOS BEARING CO.,LTD was established on Oct. 24, 2005, with registered capital of RMB 10 million. "FSZ" is our registered trademark.
Our company is specialized in producing all kinds of bearing units, while also engaged in stainless steel bearing units, zinc alloy bearing units, pressed steel bearing units, deep groove ball bearings, taper roller bearings, spherical roller bearings, ceramic ball bearings and spherical plain bearings. 80% of our products are exported to Europe (mostly Germany & UK), North America, Southeast Asia, Middle East, Africa and Taiwan. And 20% to domestic markets.
The spherical radial ball bearings have UC/UK/UCX/HC/SA/SB/CSB/CSA/CS series, etc. The bearing units have P/F/FL/T/FC/PA/PH/PW/FA/FB/PG/PX/FX/C series, etc. All of the above series have complete moulds, and the materials for bearing units have grey cast iron and ductile iron. The sizes range from 201 to 218 and 305 to 328.