Plastic bag+individual color box+carton+pallet, or according to customer's requirement
Low noise oval flange UCFL204 mounted bearing units
FSZ or OEM&ODM
Mounted Ball Bearing Units
Chrome steel,stainless steel
Z1V1 Z2V2 Z3V3
P0 P2 P5 P6
No.2 lithium Grease
Number of Row
Place of Orgin
Good after-sales service offered.
30% Paid in advance,balance after the copy of B/L
XIAMEN,Ningbo,or Your Requirement
Fast Delivery,Competitive Price,and High Quality
The Detailed Dimension of UCFL200 Series Oval Flange Bearing Units
The Tolerances for Flange Type Housings
The The Limiting Rotational Speed(RPM)
The limiting rotational speed of the mounted ball bearing untis mainly depends on the fitting between the shaft and the bearing. It is recommended that, under normal operating conditions, the fitting between the bearing and the shaft be H7. And the relevant RPM details are shown on the below table. Loose fitting is suitable for lighter load products which allow lower limiting rotational speed. On the contrary, Heavy load products which require higher limiting rotational speed should choose tight fittting named J7 fitting.
UC HC SA SB UCX CSA CSB SER UK
The Mounting Method of Housings
The correct installation order is: first install the housing, then the shaft and the bearing.In principle, the bearing units can be easily installed at any place. However, in order to have a long service life,the mounting base should be flat and rigid.
For pillow block type and flange type housings, the parallelism tolerance between pillow block housing' mounting base to the shaft and the squareness tolerance between flange housing'mounting base to the shaft should both keep within ±2°. Same as the below picture:
Foundry Casting Workshop Pictures for Reference
FUJIAN FOS BEARING CO.,LTD was established on Oct. 24, 2005, with registered capital of RMB 10 million. "FSZ" is our registered trademark.
Our company is specialized in producing all kinds of bearing units, while also engaged in stainless steel bearing units, zinc alloy bearing units, pressed steel bearing units, deep groove ball bearings, taper roller bearings, spherical roller bearings, ceramic ball bearings and spherical plain bearings. 80% of our products are exported to Europe (mostly Germany & UK), North America, Southeast Asia, Middle East, Africa and Taiwan. And 20% to domestic markets.
The spherical radial ball bearings have UC/UK/UCX/HC/SA/SB/CSB/CSA/CS series, etc. The bearing units have P/F/FL/T/FC/PA/PH/PW/FA/FB/PG/PX/FX/C series, etc. All of the above series have complete moulds, and the materials for bearing units have grey cast iron and ductile iron. The sizes range from 201 to 218 and 305 to 328.