SUNLIGHT 10A/16A/32A/40A MODE 2 EV CHARGING CABLES
Apply to Vehicle
for Tesla ,Chevrolet Volt,for Citroen C-Zero,for Fisker Karma,for Ford Focus Electric,for Ford C-Max Energi,for Mia,for Mia Electric Van,for Mitsubishi-I Miev,for Mitsubishi Outlander Phev,for Nissan NV200 SE Van,for Nissan Leaf,for Peugeot Ion,for Renault Fluence,for Renault Kangoo,for Smiths Edison Van,for Smiths Newton,for Tata Indica Vista EV,for Toyota Prius,for Vauxhall Ampera.etc. Most of EV.
This portable charging cord is easy to use. Simply connect this cord from your Plug-in vehicle to an outlet, and start the charging. The portable charger will charge at 3.84 kW (level 2) with 110V-240V plug-to-wall, Maximum working current, voltage 40A\265V plugs-to-wall could be chose by other options. Please read the product Manu follow the step to charging. Charging Type and the plug all can be OEM depends on customer demand.
1. Portable and need no to install, also can be installd on a stable position.
2. Recognition of Dangerous Voltage on the Protective.
3. Protective Conductor Monitoring.
4. Protective Conductor Presence.
5. Power Failure Monitoring.
6. Thermal Monitoring. .
7 Residual Current Device.
8. Integrated Vehicle Communication Module.
9. LED screen display charging status.
10. Working situation LED indicate.
11. Current Indicator.
12. Executing self-checking and charge recovery.
13. Customization color and logo.
14. Light Weight 2.0kg.
Select the cable length you require from the PO.
You can also choose a cable colour. We recommend high vis orange if you are charging your electric vehicle at public charge stations. We provide both 6Amp-16Amp and 32Amp-40Amp rated ev charging cables. If you’re unsure which cable is suitable for you, then check the onboard charging capability of your vehicle. Most electric vehicles are fitted with 3KW onboard charger so you would need a 16A Cable, if you have upgraded the onboard Charger to 7KW you would need a 32A Cable Keeping this EV cable and our portable domestic charger in your vehicle at all times ensures you’re always equipped to charge at any available power source.
Display screen to show you amps, charge time, voltage and KwH used, so you can know just how much money your Electric Vehicle is saving you.
• Amp Selection – Choose 6 or 8 amps using standard home plug (great for solar) or 16 amps with blue caravan plug. (charges twice as fast as a standard home plug)
• Delay Start – Set the start time for when your power rate is cheaper.
• Charge Hours – Choose when the charging stops or let it stop when its full.
• All the above are selectable options. You can just plug and charge.
Electric vehicle charging control box model and main technical index
EV charging control box model
The main power cable specifications
Maximum working current, voltage
Electric vehicle Charging box
input:3*1.5 AS3112 output: 3x2.5+2*0.75
The main performance indicators insertion force and separation
Electric vehicle charging control box of product function
Electric vehicle charging control box to meet the requirements of the SAEJ1172 also has the following functions: With input overvoltage protection under-voltage protection over-current protection with automatic stop function and over temperature protection function. Over voltage protection: 230* 1.2 AC Under voltage protection: 230* 0.8 AC Over current protection: 16A or 32A or 40A Automatic power off: when the charging current lasting 0.5 hours less than 0.3 A, automatically disconnect output, when the charging time lasted 36 hours, disconnect the output automatically. Over temperature protection: built-in temperature sensor, the internal temperature reaches 80 degrees, suspension of Work, the temperature dropped to 70 degrees to return to work. L eakage protection: After the leakage current is larger than 100 ma, cut off the output within 100 mm, and tip leakage The above protection error in 3%.
Electric vehicle charging control box of working state
1. Insert the power plug into outlet, make sure the socket with reated current below 16A. 2. Press the Amp Selection button for test the current.Choose the current type you need. 3. Insert the vehicle connector charging gun into your vehicle's inlet. 4. The screen showing CONNECTED, then start charging. 5. Middle bottom you can make time delay chose the 1-9hour charge later. 6. Right bottom you can choose charging hours
We have abundant experience of EV charging products. Our products have been successfully applied in most of countries all over the world. From cold Norway to hot Saudi Arabia, you can see form of our products. We provide the most professional products and the best quality service to each of our customers.
We pay more attention to handle the detailed part of our products, hope to provide with our customers safety, difficult to damage and convenient operation in use.
Here are some detailed pics about our Type 1 to Schuko Mode 2 EV cable :
Shanghai Sunlight New TechnologyCo., Ltd founded in 2007, is a high-tech enterprise sepecialized in the charging station, charging equipment and a variety of on-board charging equipment of electric vehicles.
Our products have been exporting the products to USA, EU markets, and be widely selected as charging equipment providers by domestic EV manufacturers.
With headquarters in Shanghai and factory in Zhejiang, With registered capital of 20 million Yuan, the company corporate with a number of companies and research institutions at home and aboard in more than two years, attracted the foreign and native advanced technology, independentiy developed with internationally advanced level of electric vehicle charging equipment and obtained several national patents.
The company currently employs three doctors, employees with master's degrees account for 65% of the total.
CERTIFICATE (We have CE, TUV, UL certifications.All our products have to pass strict inspections and repeated texts before they leave factory.)
1. Professional equipments to make the excellet products with quality controland saving cost in foreign trade.
2. You inquiry related to our product & price will be replied with in 24 hours.
3. Well-trained & experienced staff are to answer all your inquires in Engliash or other language.
4. Working time: 8:00 am - 10:00pm, Monday to Saturday (UTC+8).
5. Your business relationship with us will be confidential to any third party.
6. Good after-sale service offered. Please feel free to contact us if any more information needed.
1. Do you have any MOQ of the product ?
No. But price rang different with order QTY.
2. What is the delivery time ?
Sample time 6 days, about 30 days for the mass production.
3. Can we put our logo on the products ?
4. How should I pay for you if I place order to you ?
Usually, 30% T/T deposit in advance, 70% balance against the copy of B/L.
5. How about the minimum order quantity?
Normally for one, but it depends on the real situation .
6. OEM/ODM and any of your special requirement will be accepted.
7. We have professional QC systems and professional workers. We can guarantee all the product quality is excellent that is selling to you.
8. We have great experience on EV charger and provide high quality service to distributors and retailers.