Printing Shops, Energy & Mining, Advertising Company
Place of Origin:
Jiangsu, China (Mainland)
RX-laser energy, RX-laser energy
Optical current output power:
CE ISO FDA
Packaging & Delivery
Single package size:
Single gross weight:
1 - 1
2 - 10
11 - 50
To be negotiated
What is the CO2 laser glass tube?
CO2 laser tube is mainly used for laser engraving machine, laser marking machine, laser engraving machine, laser cutting machine, is the core component light, and can be carved and cut acrylic, cloth, leather, bamboo, wood, engraving, etc.
[HARD GLASS PART] the part formed by firing into the discharge tube GG17 material, water-cooled jacket, storage units and back to the trachea and components. Sealed-off CO2 laser is typically three pipe structure. Innermost discharge tube, the middle is the net water jacket, the outermost layer is the gas storage units, return pipe is used for communicating and gas discharge tubes.
[ELECTRODE PORTION]: CO2 lasers generally use cold cathode is cylindrical in shape, the choice of the cathode material has a great influence on the life of the laser, the basic requirements for cathode materials are: sputtering rate, small gas absorption rate, commonly used metals material nickel.
1.Stability: the discharge glass tube body is imported from Germany. The laser beam mode is up to TEM00. The power is table. It is competitive for industrial application. 2. Power: The power is 30% higher than other laser tube with same length. 3. Long Life: the catalyst coating on discharge tube with unique electrode processing makes the laser out put is more stable, avoid power weaken during long time working.
CO2 Laser Tube Application
1) It's a laser source used on co2 laser cutting/ engraving machine to do laser cutting/ engraving on most of non-metal materials; 2) Mainly used industry: outdoor sign, gift, garment, shoes manufacture, as well as medical therapy; 3) Main materials processed with laser cutting/ engraving: leather , cloth , paper, glass, acrylic , wood, MDF, color board, etc. 4) SPT CO2 laser tube has a high quality laser beam
How to identify a good or bad laser tube?
1)Install the laser tube properly; 2)Prepare a piece of acrylic board; 3)Put the acrylic board on the light outlet of the laser tube for laser dot test; 4)If it can form a standard conical hole (it proofs the standard TEMOO Basement Membrane Mode was applied), it means the laser tube is qualified. Then you can use it without any worry.
Installation Requirement Make sure to follow the operation instruction of model S2 as shown in the illustration. The dedicated power P12should be equipped. The positive pole of laser tube is in high voltage (the ignition voltage is 19kv). It may cause the following consequence when it is failed to follow the instruction: Arcing; the inner tube will be punctured by electricity and may cause water leakage. Operation conditions
Water cooling: using purified water; 2 to 5 liter/minute; water temperature: 10-40c. The operating environment: temperature 2-40c; humidity 10-60%. The working current: test current is 29mA. Maximum working current is 29mA. The running current must be kept below 27mA. The life span can reach 8,000 hours if the current is kept below 25mA. The ammeter must be connected to the negative electrode of laser tube.When it is working under over-high current for long term, the negative pole will appear light yellow and the life span will be shortened rapidly. To protect dust from going into the insulation sheath, please wrap it with plastic film. Working Performance Cutting function. Engraving function: Very good.
When the working current is 4mA and the tube is in the state of preionization, the laser can be used for high-frequency impulse engraving. Key Notes Do not clean the exterior surface of the output widow mirror with tools such as tampon; otherwise the output power will be seriously affected. The followings are the designated methods to clean up pollution in the exterior surface of window mirror: 1) When the mirror is polluted, do not turn on the laser. 2) Blow the mirror surface sideways with an air blower. 3) Spray the pure alcohol on the mirror surface with sprayer. 4) Turn on the laser after the alcohol gets fully volatilized. 5) If the methods above don't work effectively, it is necessary to ask for the professional to use tampon with alcohol to clean the mirror surface from middle to edge. The best solution is to prevent the window from being polluted. Attention: it is forbidden to clean the mirror with acetone. The screws in the front and back ends of the laser tube are not allowed to be moved, otherwise the output power will be declined, even the tube will be scrapped. Put the acryl 300mm far away from output mirror, when testing its laser spot. Safety The laser beam is invisible light. Please wear protective glasses when debugging the laser. The positive pole is in high voltage. Pay attention to the security marks. Storage and Transportation Requirement Pour out cooling fluid in the event of storage and transportation, and cover the output terminal with a dust-proof plastic bag. The storage environment is 2-40c , and the requested humidity is 10-60%. Pack the laser as in the original way. Important notes: it is requested to use adhesive tape to cement the sponge together with laser tube to prevent the tube from vertically sliding during transportation. The sponge in the side of output mirror must be 70 mm beyond it, and the sponge in the side of reflecting mirror must be 50 mm wider.
2)Max power 35w
8)Optical current output power: 28w( max 35w)
More details, please contact us directly.
Where to use
Packing & Delivery
Shipping carton + quake-proof foam or according to your requirement.
We have been manufacturer for over ten years. Welcome to your visit!