Microwave Motion Sensor and Emergency T8 LED Tube Light with Battery Backup
ALLMAY Patent T8 emergency tube with microwave motion sensor is 50% more energy efficient than conventional tulbs, and includes battery back-up power as well as microwave motion sensor. Battery back up for up to 3 hours when power failure, Microwave movement sensor with up to 8 meters detection range. Lamp will dim to just 3W when no motion is detected.
With high energy efficacy and excellent thermal management, LED Emergency Tube is a versatile solution for indoor projects of any nature.
Allmay LED Emergency tube with motion sensor is equipped with intelligent protection circuit for over charging and over discharging. it switches to emergency mode 1 second after AC is off. It is used in veneus that requests emergency lighting function, such as hospital, parking lot, corridor, metro station. shopping mall, restaurant etc...
Available in Daylight (6500K), Warm (2700K)
Energy saving 85% than fluorescent tubes
Maintenance saving 95%
Replaces standard T8 fluorescent tube lamps
Available in lengths from 2ft to 4ft
Provised even light spread with no shadowing
Emergency, Microwave Sensor Options available
T8 4ft LED Emergency Tube Technical Specifications
LED Rechargeable emergency light is for replacement of fluorescent lamp
in case of emergency lighting.
60cm (2 feet)
90cm (3 feet)
120cm (4 feet)
<15% at 10,000 hours
90-265V AC 50/60Hz
Radar Sensor specification
180*360 degree (Pls check following diagram)
Hold time (delay time)
1) 2700K comes up with lower lumen
2) Luminous Flux tolerance +/-10%
3) The above datas are tested by Allmay instruments.
1. Before installation, be sure to cut off electricity to avoid electric shock.
2. Please do wiring according to Figure 1 (Above)
3. When power is off, the emergency battery comes into effect and keeps offering power to the tube with DC.