Product Name : 568R Type Multi Function Crimp Tool
Cat5e standard, suitable for RJ45 Connector. With stripping function, meet domestic installation requirements, quality assurance This tool integrates all the functions of wire clamp, and can easily cut, press and strip the wire. Standard connection of twisted pair:
Twisted pairs are generally used for star network wiring. Each twisted pair connects various network devices through RJ-45 connectors (commonly known as crystal heads) installed at both ends. The standard connection method of twisted pair cable is not arbitrarily stipulated. The purpose is to ensure the symmetry of cable joint layout, so that the interference between the cables in the joint can be offset each other.
Cat5e line is a common network line in network routing, which can be divided into shielding and non-shielding. If it is used outdoors, shielded wires are better. Generally, it is enough to use non-shielded five types of wires indoors. Because there is no shielding layer, the cable will be relatively soft, but the connection method is the same. Generally, there are four pairs of twisted thin lines in the super-five lines, and they are marked with different colors.
There are two types of twisted pair connection: EIA/TIA 568B standard and EIA/TIA 568A standard.
The tail of the Connector is downward (i.e. the flat side is upward) from left to right, which is set at 1 23 4 5 6 7 8, respectively. The following is the distribution of each orifice.
T568A line order Green, white, green, orange, white, blue, white, orange, brown and white brown T568B line order Orange, white, orange, green, blue, white, green, brown and white brown
Specification parameter :
Carbon Steel,Stainless Steel
PVC Sleeve Handle
Blue & Black & Orange & Red
RoHS SGS CE ISO9001
1 Piece/ Blister Card
For Various Wires
Min Stripping Capacity
Max Stripping Capacity
Crimping, For RJ11 RJ12 RJ45
CAT5E RJ45 Connector Unshielded 8P8C 100 pcs/pack
External EZ RJ45 Connector Shielded 8P8C For CAT6/5e