PWAY 200m Wireless HDMI Extender HDMI Wireless Extender H.264 Technology with Loopout Signal up to 1080P
This Wireless HD Video Solution enables wireless transmission of video/audio from any HDMI video source , such as PC/HDTV to display devices that includes HDTV/HD Monitor over the 2.4GHz/5.8GHz band, with very low latency.
It does not require any special configuration of software driver installation-simply connect the transmitter to the HDMI output of the video source and the receiver to the HDMI input of the Panel/TV/Monitor. Its Plug & Play operation makes it the ultimate solution for the most demanding indoor/outdoor professional environments.
This Wireless HD Video Transmission Solution is widely applicable to family entertainments, office presentation, lecture, education, medical treatment, party, conference etc.
l Apply H.264 technology.
l Dual band:The user can select 2.4g or 5.8g on button
l Support HD devices with HDMI input/output, include Blu-ray player, DVD player, PC, laptop, HDTV etc.
l Support resolution: 480i@60Hz, 480P@60Hz, 576i@50Hz, 576P@50Hz, 720P@50/60Hz, 1080i@50/60Hz, 1080P@50/60Hz
l Support20-60KHz wide infrared remote control function to control source device content from long distance.
l Latency:≤200ms in without obstacle room.Usually latency is 0.4s in the obstacle and wifi room.
l Transmitter have one local loop out.
l Support 1TX to 1 RX , 1 TX to 2 RX and 2 TX to 2RX
l Effective Range: 200m/656ft in 2.4G, 120meters in 5.8G in the outdoor empty and without obstacle environment, usually 50-100meters.
l could pass through 1 solid wall between the two rooms(15m-20m).No cable between sender (TX) and receiver (RX)
l Easy and clean installation
l Plug & Play – full hardware design, no software is required
Transmission distance will be different due to the environment if you use in build where is already have wifi, 5G is better.
Wall, brick or glass will shorten the signal cover range or cause big signal loss
HDMI signal input/output
IR signal input/output
Power adapter socket
Back Down UP OK Key
Adjust 2.4G/5.8GHz channel.
Video signal connection indicator
System power indicator
1.Back: return the last step.
2.Down: Press “ Down” key , the number display on “ Channel” will be down ,for example “5.8 “ to “5.7”
3. Up: press “ Up” key ,the number display on “ Channel” will be up ,for example “ 5.7” to “ 5.8”
4. OK : after changed the channel ,need to press “ OK ” key .if not ,after 3 seconds ,will back to last channel .
5. Channel: display the channel number . for examp
2.4G: 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8
5G : 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8
1, Connect the provided DC/5V power supplies to the power socket of the transmitter and the receiver,
2, Connect an HDMI cable between the HDMI input port of transmitter and the HDMI output port of the video source,
3, Connect the HDMI output port of receiver to the display device with HDMI cable,
4, IR function---connect the IR TX (the bigger) cable to the HDMI receiver, connect IR RX cable to the HDMI transmitter and the IR TX must face to the controlled device.