First. energy saving, sound insulation The thermal conductivity of the synthetic resin tile is 0.325 w/m.k, which is about 1/3 of the clay tile, 1/5 of the 10 mm thick cement tile, and 1/2000 of the 0.5 mm thick color steel tile. The insulation performance of the tile can still be optimized without considering the addition of the insulation layer. Experiments by phoneme measurement show that the tile can absorb noise well when subjected to external influences such as heavy rain, hail, and strong wind. Second, the impact resistance and low temperature effect is good A 1 kg steel ball freely falls on the tile surface from a height of 1.5 m without cracking. After 10 refrigeration cycles, the tile has no empty drums, bubbles, peeling, and cracking. Third, the color is lasting The synthetic resin tile maintains its color stability even after prolonged exposure to ultraviolet light, moisture, heat, cold and impact. Through the 6000-hour artificial aging test of the National Chemical Building Materials Testing Center, the test result was dartaE=3.4. Fourth, excellent resistance to load Through the national building materials and component quality supervision station inspection, under the support interval of 750mm, the weight is increased by 150kg, and the product is not damaged. Five, excellent self-waterproof performance The high weather resistance resin selected for the synthetic resin tile itself is dense and does not absorb water, and there is no problem of microporous water seepage. The synthetic resin tile has a large single sheet area, few joints on the roof, and a tight joint at the lap joint, which can save the waterproof layer. Sixth, light weight Synthetic resin tiles weighing 5.9 kg per square meter are a lightweight material. There is no need to install too much steel structure, and the load on the wall and foundation is small. Seven, self-cleaning The product itself should not be used to absorb dust. Once it is washed by rain, it will be as clean as new, and there will be no plaque that is washed away after the scale is removed. Eight, excellent corrosion resistance The product can resist the corrosion of various chemicals such as acid, alkali and salt for a long time, and will not be degraded by rain and snow. Nine, strong fire resistance The main resin of this product is a flame retardant product, and the fireproof performance of the national fire prevention authority has reached B1 level. Ten, volume stability Synthetic resin tile has a coefficient of expansion of 4.93×10-5 (1/°C) and has biaxial tensile properties in geometric design. Even if the temperature changes greatly, the expansion and contraction of the tile can be digested by itself to ensure the geometry of the tile. stable. XI. Insulation Another technical feature of the product is that it is non-conductive and will be intact in the event of an accidental discharge. Twelve, simple installation The product can be fixed on the steel sandalwood with screws, and then supplemented with main ridges, slanting ridges and other accessories, it can be durable and has a service life of more than 35 years. It can be seen that synthetic resin tile is very promising as an excellent tile category, and it is very necessary to select excellent synthetic resin tile equipment.