Spear, Faucet, ball locks, brass fitting and gas dispenser
Brass beer faucet
Bar, party, home, picnic and berwery
Easy to operate and eco-friendly
SGS FDA LFGB
Packaging & Delivery
Single package size:
Single gross weight:
6pcs in one carton.
1 - 300
To be negotiated
1. Ball lock posts for liquid and gas, easy to remove. 2. Best personalized gift set for home brewer, brew-master and bartenders to enjoy fresh beer. 3. Regarded as a lid, the spear can seal right even if all accessories are removed, and also room-saving!
4. Cost-effective way, CO2 regulator or both tap can be interchangable, you can take them from this keg spear to another.
Double Quick Connector Spear
Food grade 8/18 Stainless steel
Non-flow-control Brass Faucet
Liquid Side Ball Lock Fitting-Flared with 1/4" thread
Gas Side Ball Lock Fitting-Flared with 1/4" thread
Regulated CO2/N2 Dispenser with Gauge of 60PSI (Outlet 7/16" -20UNF)
Double Quick Connector Spear
Safety pressure: 30PSI Gas-in: Gas side ball lock fitting - flare (7/16"-20UNF) Beer-out: Ball-lock post liquid in black and plastic faucet. Advantage: The bleed valve for replacing any air in the keg with CO2 to stop oxidation of the beer, keep beer fresh for weeks.
Non-flow-control Brass Beer Faucet
Material: Brass faucet with plastic handle. Suitable use: Kitchen, party, picnic etc. Feature: Easy to grip, enjoy happy camping, caravans time with your friends and families.
Regulated CO2/N2 Dispenser with Gauge of 30PSI (Outlet M8*0.75)
Gauge range:0~60 PSI Adjustable outlet pressure: 0~40 PSI Suitable capsule: Threaded 16 (74) gram CO2 or 18 gram N2 cartridges. Notice: Keep regulator knob in OFF position before turn in cartridge to avoid destroy gauge.
Start with 2~3 PSI and lightly increase to 4~5 PSI (max 8~10PSI) to achieve perfect pouring.
Share your favorite beer. Hey! This beer dispenser can match 2l, 4l,5l,10l keg. you can share your favorite beer with friends by the mini keg. On BBQ, party, outdorr, travel, etc.
We are specialized in draft beer packing and tapping solutions since 2013,.like stainless steel mini keg, beer bottle/ growler, CO2 dispenser, beer tapping system and home brewing accessories. We are cooperating with ISO certified manufacturing facilities in China. Our products have passed testing by SGS and Bureau Veritas as per FDA, KFDA, LFGB and EU standards.
If you want to have a further discussion with us. please click on " send " You can also check our website.
Leaks gas as soon as the cartridge is installed
1.Make sure the regulator dial is off turned all the way counter close
2.Tighten the cartridge seal Replace the CO2 cartridge it is damaged
The tap is open, but no beer comes out
Make sure the CO2 cartridge is installed, the cap is turned on, and pressure is indicated on the pressure gauge.
Tap continues to drip ,
without stopping when closed
1.A few drips after closing the tap is normal. But it should not drip over time. 2. If the keg and tapping system is clean, internal O-ring may have worn through use and be in need of replacement.
Beer pours foamy every time (more than1/4 cup of foam)
1.First pour may be foamy if the beer line is full of air after being filled or the tap assembly has been allowed to warm up. Second beer should pour fine, if that's the case. Keep out of the sun.
2.Beer may be highly carbonated from the bar or brewery. If beer in keg is pressurized at 5 psi but came from brewery beer line pressurized at 25 psi, beer will pour foamy until the pressure equalizes after few days in the keg.
Be sure to open the tap handle fully and let go during the pour. Attempting to meter the flow during the pour can lead to foaming.