24 cartridges and 24 nozzles per paper carton.
1500 cartons (36000Pcs) per 20'ft GP;
Carton Size: 36x20x25cm
Free Sealant guns available.
Guangdong Shenzhen shanghai
1 - 10000
10001 - 50000
To be negotiated
KLX-717Silicone weatherproof Sealant
forStones & Marbles
KLX-717 silicone sealant is a kind of one-component, medium-high modulus, neutral curing sealant. It is specially designed for insulating and sealing during stone assemblies and stone curtain walls installation. Warranty is more than 20 years.
1. KLX-717 Silicone weatherproof Sealant for Stones & Marbles can produce superior adhesion to most building materials without base primer. 2. Easy to use: it can keep good consistency and easy to extrude at - 25℃ ~ 50 ℃.
3. Excellent thixotropy and extrusion properties, it can be extruded at any normal temperature (- 40 ~100 ℃).
4. Good adhesion, excellent adhesion to stone, ceramics and cement components and other building materials; no pollution to porous materials.
5. Excellent weather and aging resistance, excellent tensile and compressive resilience, can bear ±20% displacement capacity.
6. Neutral solidification, no corrosiveness to stone, cement and other building materials, overcome the shortcomings of acid glue (ordinary glass glue) corrosive materials.
KLX-717 Silicone Weatherproof Sealant for Stones & Marbles
Black, white gray or customized
Aluminium Foil sausage type
1. KLX-717 Silicone weatherproof Sealant for Stones & Marbles is suitable for sealing of dry-hanging marble or granite curtain wall engineering project and cement prefabrication engineering project;
2. Concrete expansion joint sealing of road engineering project;
3. Bonding and the joint sealing of sanitary ware installation, ceramic engineering project;
KLX-717 Silicone weatherproof Sealant for Stones & Marbles is not suitable for structural assembly use and the following conditions:
1. All materials that ooze grease, plasticizer or solvent, some unvulcanized or partially vulcanized rubber and adhesive tapes;
2. The construction part that is not ventilated since silicone sealant needs moisture in the air to solidify;
3. Long-term immersed and year-round underground damp environment;
4. Paint surface, because the cracking or peeling of the paint film may cause the failure of sealing;
5. Frosted or damp surface;
6. Surfaces with direct contact with food;
7. Areas susceptible to mechanical wear;
8. Not advisable to construct when the surface temperature of the material is lower than 4℃ or exceeds 40℃.
1. Clean the interface before using, if necessary, use special solvents to clean and keep dry. If primer is used to enhance the adhesion, it must be constructed after the primer is dried.
2. Completely filling to the joint to ensure bonding on both sides during construction.
3. Adhesive tapes should be affixed to the place where protection is needed, but the tape should not touch the surface to be constructed.
4. Trim immediately before curing to achieve a beautiful appearance.
1. Maintain a good ventilation environment at sealant construction site; and
2. keep out of reach of children to avoid eating by mistake;
3. If the eyes are inadvertently exposed to the uncured adhesive, promptly wash with plenty of clean water and ask help from a doctor.
1. KLX-717 Silicone weatherproof Sealant for Stones & Marbles should be stored in the original packaging under dry and ventilated conditions with temperature at 27 ° C or lower.
2. The product shelf life is 12 months from the date of production.
KLX-717 Silicone Sealant for Stones and Marbles and Ceramics
Fine, smooth paste, No agglomeration
Surface drying time
Adhesive property with definite elongation
Adhesive property under UV irradiation
Adhesive property after Cold drawing/hot pressing
Adhesive property definite elongation with soaking
mass lost rate
Sichuan Kelixin New Material Co., Ltd. was established in September 1999, located in Shuikou Industrial Zone, Leshan Central District. It is a "national high-tech enterprise" specializing in the research, development and production of silicone new materials. The company had completed the 13,000 tons/year silicone fine chemicals Silicone sealant rubber or silicone rubber project, currently ranking the second largest in the western region. Presently, the company is the second largest silicone defoamer and silicone sealant rubber manufacturer. We are exporting of silicone sealant rubber and silicone defoamer to many African countries like Egypt, Nigeria, Angola, South Africa, Kenya etc; and south Asia countries like India, Bangladesh, Pakistan, Sri Lanka and southeast Asia countries like Philippines, Indonesia, Malaysia, Cambodia, Singapore, etc and countries from Mid east and Europe as well as Americans.
As a new and widely use sealant, the silicone sealant is well know for its good adhesion, elastomeric features, meantime, it is weatherproof, vibration resistance, moisture resistance, odor resistance and adjustable in high heat and humidity. Whats’ more is is comprehensive to most of construction materials, so there exist a very prominent value for the market.