bundles for DN80-300mm ductile iron pipes
bulk for DM350-2600mm ductile iron pipes
Tianjin, Qingdao, Lianyungang port
1 - 3000
To be negotiated
T-Type push-on Joint
T-Type jont ductile iron pipe adopts socket-spigot connection and rubber ring seal with a flexible joint, with a result of easier pipe installation & construction, and in addition, a certain angle of deflection generated bings an obvious superiority to make it be a current leader and broad use in all varieties of cast iron pipes.
Internal and external Classification
1. Common coating
Ordinary portland cement mortar is coated internally while zinc and bituminous paint is painted externally.
2. The internal coating of sulfate cement mortar
Sulfate cement, also known as high sulfate-resistant cement, has a good sulfate corrosion resistance and a wide application in transporting some highly corrosive mediums such as seawater.
3. The internal coating of aluminate cement mortar
The ductile iron pipe for sewer line complying with ISO7186, EN598 and GB/T26081 is coated with aluminate cement (also known as high-alumina cement) internally, with a result of excellent resistance to chemical corrosion and abrasive resistance which is much more suitable for transporting rainwater, sanitary sewage and some kinds of industrial sewerage water.
4. Zinc-Aluminum coating
The outside surface of cast iron pipe is coated with Zinc-Aluminum coating (85%Zn+15%Al) weighed 400g/m2, which is suitable for soil with higher corrosivity.
5. The internal coating of epoxy ceramic
The interior of epoxy ceramic is made of epoxy resin, quartz powder and others with a dry film thickness of more than 1,000μm, and the excellent corrosion resistance electrical insulating property makes it be a preferential position in transporting municipal sewage, reclaimed water, etc.
6. Epoxy resin seal coating
The cast pipe with epoxy resin sealing coating is equal to a cement inner-lining coated by a layer of epoxy resin sealing, whose thickness is determined in accordance with the characteristics of transmission medium, and has wonderful abrasive resistance and corrosion resistance. Thanks to the seal coating, the precipitation of hazardous substance is effectively resisted, commendably avoiding the pollution to transmission medium and more suitable for the direct delivery of drinking water.
7. Polyurethane coating
Polyurethane coating is made of bi-component polyurethane materials to a scale, and not noly does it serve as the inner-lining material of nodular cast iron pipe, but as related outer erosion resistant coating. Polyurethane coating has many advantages such as wonderful avrasive resistance, excellent corrosion resistance, non-permeation, smooth surface, small resistance coefficient, few volatile organic compound, remarkable environmental protection property, etc. Some polyurethane coatings with a thickness above 900μm are mainly applied to transporting corrosive mediums or themediums with high sanitary condition, including soft water, desalination seawater, municipal wastewater, industrial wastewater, and others; and some with thickness above 700μm are mainly applied to the soil environment with strong corrosivity such as the soil polluted by industrial wastewater or with low specific resistance.
Technical Parameters of "T-Type" joint Centrifugal Dcutiel Cast Iron Pipes
Pressure gauge for hydrostatic testing standard (Class K9 Standard ISO 2351/ EN545
Factory and Pipes
Packaging & Shipping
We provide full-process services:
Pre-sale service: make survey of customers' demands, customize solution, provide various technical data of products, and ensure delivery of products to project sites safely within the specified time.
After-sale service: arrive at the site within 24 hours to provide instructions and solve problems whenever necessary; provide instrctions for engineering design and installation; unconditional replacement of new products if any defect is found.
1. How is your price?
A: Although we have brand-name products, our prices are very favorable and
competitive.Because of our best price, customers from all over the world come to
purchase our products.
2. How long is your warranty?
A: Our Warranty is 12 month.
3. Can I get free samples?
A: Yes, we can provide you the free samples, but you need to bear their own delivery
4. Can I request to change the form of packaging and transportation?
A: Yes, We can change the form of the packaging and transportation according to
your request, but you have to bear their own costs incurred during this period and
5. Can I request to advance the shipment?
A: It should be depends on whether there is sufficient inventory in our warehouse.
6. Could you specially design and produce for clients?
A: Sure, we have all kinds of professional engineers.We can design and produce
special products according to customers' request. Such as: special size, special
control, OEM, etc.
7. What’s the MIDAS main market?
A: Our main market is African, Middle East Countries, South American, Asian.