Working power supply:4 AA size batteries, external standby power supply
Types of Card: M1
Support download 200pcs out of the records
Identify ways:To be used along with BW independent door lock.
B. Usage and Settings
Initialize:Short-Circuit the two INI feet on the safe box circuit board to restore factory settings
Set card:Set safe box’s password, room number and time through the set card..
Clock card:Calibrate safe box clock, clock is the basis of the open box record.
After set completely and successfully, safe box is supposed be used normally..
Safe box has two different status, idle status (No guest occupied) and in use status (guest card closure)
Management card: Include emergency card, general control card,
Guest card: Use valid guest card (that is, the card’s password matches the room number) to close the safe box, then the safe box changes to in use status, only the guest card (Used for closing the box previously) can open the safe box. After opened the safe box, safe box changes to idle status;
Report card: When lost emergency card, use report card to operate blacklist.
General clean card: In idle status, clear all card numbers in blacklist.
Record card:Made three record cards to extract 200 most recently box open records.
Once guest lost the room card, it is able to use the emergency card to open the in use safe box and turn the safe box to idle status. When using the mechanical key to open the safe box, the safe box will not change to idle status; The safe box records all kinds of operations.
Use the emergency key to open the safe box when the safe box can’t be opened under circuit failure condition.
Should replace the backup batteries immediately when Low-Voltage alarming, otherwise the safe box will be locked after 30 switches, at this moment, can only use emergency card or key to open the box.
System equips a backup power supply electric outlet (DC5-7V can outlet with 4 cells of AA size alkaline batteries as external power supply).
The safe box only checks the password, room number and card number, does not check/judge the card’s valid time.
Service staff needs to check the safe box to make sure it is in idle status when checking room.
After used emergency key to open the safe box, must use mechanical key to close it so that the safe box can change to normal status.
Recommend to calibrate the safe box clock per 2~3 months.
Please remove batteries or power off when not using the safe box for a long time.
Replace batteries should use 4 cells of AA size alkaline batteries.
E. Indication of Sound and Light
Sound and light show
Initialize the success
Blue light 2 times flicker, 2 short-beep
Read a card successfully
Blue light 3 times flicker, 3 short-beep
Close the door normally
Blue light lights up, short falling tone beep
Open the door normally
Blue light lights up,long falling tone beep
system password error
Red light 2 times flicker
Latch breaks down
Red light 5 times flicker, 5 times short-beep
Safe box in using
Red light 2 times flicker, blue light 2 times flicker
Under voltage alarm
Low-voltage times limit
Wrong room number
Red light 3 times flicker
Blue light 3 times flicker, red light 3 times flicker, 6 short-beep
Blacklist area (Report card area) full
Blue light 1 time flicker, Red light 1 time flicker, 1 short-beep