Plastic Bag+Sigle Box+Carton+Pallet, and OEM&ODM Service is Acceptable.
Self-Lubrication ZrO2 Full Ceramic Ball Bearing 6205CE
Ceramic bearingsare typically constructed with a ferrous inner and outer ring with ceramic balls in stead of steel. They takes many advantages over steel bearings, such as higher speed and acceleration capability, increased stiffness, lower friction and more.
Ceramic bearingsmade of Si3N4 have greater hardness than steel. Ceramic bearing balls have smoother surface than most steel bearings balls. They require less lubricant and exhibit lubrication degradation, which results in increased bearing life.
Ceramic bearingsare applied on high temperature, high speed, friction, semiconductor and food processing and so on.
Advantages of Ceramic Bearings:
u essentially increased life time
u high stiffness because of high Young’s modulus,lower vibration
u wear resistance and cost effective lubrication
u electrical insulation and non-magnetism
u high temperature resistance up to 1000oC
u high corrosion resistance to most acids and alkalies
1).High speed bearings:12000rpm--75000rpm 2).High temperature-resistant bearing:100°C--800°C.It can been applied in kiln,plastic,steel and other equipments that can bear high temperature 3).Corrosion-resistant bearings 4).Electric-insulated bearings 5).Vacuum bearings:self-lubricating without
Full ceramic bearingcould be used in following industries: chemical, semi-conductor, valve & pump, food, electronic, medical, vacuum, refining, insulation, etc.
Full ceramic bearingis not suitable for heavy loading, impact loading and variable loading application.
Material: ZrO2, Si3N4, SiC and Al2O3, etc.
1.ZrO2 Full Ceramic Bearing
Zirconium oxide ceramic bearing(ZrO2):the rings and balls are all zirconium oxide ceramics with cages made by PTFE,nylon strengthened by glass fibles.
2. Si3N4 Full Ceramic Bearing
Full ceramic bearing made with Si3N4 have some better performance than Zr02, the rings and balls made by full ceramic material: Si3N4, as a standard constructure, the cage made by PTFE, generally we also made the cage with GFRPA66-25, PEEK, PI, Phonemic Textiles Tube, etc.
Compared with the material of ZrO2, the Si3N4 ceramic bearings could endure heavier load and could be used in higher temperature environment.
FUJIAN FOS BEARING CO.,LTD was established on Oct. 24, 2005, with registered capital of RMB 10 million. "FSZ" is our registered trademark.
Our company is specialized in producing all kinds of bearing units, while also engaged in stainless steel bearing units, zinc alloy bearing units, pressed steel bearing units, deep groove ball bearings, taper roller bearings, spherical roller bearings, ceramic ball bearings and spherical plain bearings. 80% of our products are exported to Europe (mostly Germany & UK), North America, Southeast Asia, Middle East, Africa and Taiwan. And 20% to domestic markets.
The spherical radial ball bearings have UC/UK/UCX/HC/SA/SB/CSB/CSA/CS series, etc. The bearing units have P/F/FL/T/FC/PA/PH/PW/FA/FB/PG/PX/FX/C series, etc. All of the above series have complete moulds, and the materials for bearing units have grey cast iron and ductile iron. The sizes range from 201 to 218 and 305 to 328.