US $1 - 1000 / Set1 Set/Sets
EUR 5000 - 8000 / Set1 Set/Sets
YL-4210S NIR conveyor(single side double layers )
1. Infrared ray uses the trait of optical radialization, permeate from inside to surface, make dry throughly. No need pre-heat, NIR lights can light up directly to increase the temperature, fast speed, only need 60seconds. When getting to the reserved temperature, then will keep it, penetrated heating, steady quality.
2. Comparing with traditional conveyor, it saves more than 30% space. With flexible wheel at the bottom, easy to install. And can move according to process.
Production output: design the length of conveyor according to 800~1500pairs/8hours.
3. The working board can be moved with willing, clients' different needs.
4.Use SCR voltage transformer mould system to control the temperature, it's regular and accurate, to make better attaching.
5. With the equipment of exhaust. It can effectively to remove the organic gases protect environment.
6. According to client's needs, we can design the management system of program. Display the capacity from every hour to mouth and analysis of capacity. At the same time ,it has the monitoring system of break and alarm system. Any time you can control the production of workshop. And it also is equipped with malfunctions detection and warming system.You can control the production status any time.
7. With adujastable shoe supports that is suitable for different shoe model.
8. Increase auxiliary heating system: it's convenient to decline winter temperature and not effect the machine status. In summer , it can save 50% electrical energy.
We also have the following conveyor series:
YL-4310S NIR CONVEYOR(Double Sides):
1.using ordinary circuit(optional siemens computer control system)fully compatible with assembling outsole operation,processing,cementing,process design,improve production efficiency and quality.
2.it can be seporately controlled upper and outsole the temerature.according to the human body theory,up layer and down layer could be trasort at the same time,up latyer is outsole conveyor,down layer is upper conveyor.this operator to reduce physical exertion productivity increases.
3.the machine set up multiple sets of temperature,they can always choose to adjust the required tempeature,it is easy to operate simple,uniform and stable temperature.
4.Befor assembling the outsole,the oven have not glue-activated device.ant add adhesion strength with the outsole.
5.quick conveyor belt can directly sent the shoes to the work place,in order to avoid cool shoes,which will help adhesion strength for the outsole.
6.using hot air convection loop design,quick heating,thermal recycling,saving electricity.
Suitable shoes kinds:natural skin type sports shoes,casual shoes,hiking shoes,etc
76 CYCLONE ACTIVATOR:
With 16-76 pallets.
1.Completely new design with humanization,excellent operation interface.
2.High efficiency NIR infrared heat radiation for heating and drying process.
3.PlC controls temperature and capacity correctly.
4.Seperately controller for three layers.
5.Moveable oven,fast adjustment if shoes making process is changed.
6.Integrated sole attaching and assembly.
7.Strong air draft fit for environment request.
8.Disign different standard based on customers capacity.
9.Excellent manufacturability,flexible and easy operation.
42 CYCLONE ACTIVATOR:
1. With 16-76 pallets.
2. Dry and activate through NIR hot air, good for drying for upper and outsole.
3. Every revolving pallet:
One pair of upper can be put in buttom pallet.
One pair of outsole can be put on top pallet.
1. Digital electric controller control the time on drying and activating.
2. 16-76 revolving stations get a circle ,work with revolving time.
3. Every station have 6-12 pallets.
4. 42 Cyclone (one /two time cement /2 circle ).with one oven , activate 4 pallets.
5. 42 Cyclone (two times cement /one circle ),with two ovens activate 4-6 pallets.
6. Protect environment
7. Safe device
Chooseable part: NIR heating lamp
YL-252 GEMENT DRYING AND ACTOR:
The machine has been designed for cement drying and activating before sole attaching. After strong hot air blowing, the adhesive is then activated by infrared lamp. The transportation speed, the air temperature and the heat emit from the infrared lamps can be adjusted easily.