Taidacent House Wireless Smoke Alarms SS-168P Fire Wireless Interconnected Smoke Detectors Independent Photoelectric Smoke Alarm
303.825 / 433.92MHz (optional)
meets UL's 217 standard
Wireless transmission distance 30 meters indoor (different use of the environment will be different) Alarm volume ≥85db
≤ 10 seconds due to gas concentration and extended
-10 ° C to + 50 ° C
Shell material ABS + PC fire retardant materials Product size Diameter 105 * 38mm
Application and installation
1. Select a suitable installation area.
2. Draw two holes on the ceiling or wall according to the holes on the mounting bracket.
3. Lock the two holes between the two holes.
4. Insert two plastic waist nails into the two holes, and then the back of the makeup mounting bracket should be close to the wall.
5. Insert and tighten the mounting screws until the mounting bracket is completely secure.
6, This detector is a closed type device and is not allowed to open. Please connect the photoelectric smoke temperature line color (connection method as shown in figure a / b).
7, with the back of the detector to the installation location mouth, and turn clockwise, and make sure that the two screw heads have slipped into the waist hole.
8. A smoke temperature fire alarm is installed every 25-40 square meters in the room. Above the important equipment, a smoke temperature fire alarm is installed 0.5-2.5 meters.
9. Press the test button lightly to test whether the detector is working normally.