Paper Coating, Rubber Coating, fabric/textile coating
Milky emulsion or faint yellow emulsion
Solubility in water:
soluble easily in water
textile super hydrophobic coating
1100 Ton/Tons per Month for super hydrophobic coating
Packaging & Delivery
Available in 200 kg/ barrel or 25 kg/ barrel for super hydrophobic coating
Shanghai or other ports
Textile chemicals water based fluoropolymer
super hydrophobic coating
lEndow the fiber with excellent waterproof and oil proof properties
lMake the fiber alcohol resistant
lNonflammable water based emulsion
lApplied by spray, foam, coating, wet roller, padding, dip-coating and other ways
lStability while using with other additives together
lDon’t need to add the crosslinking agent to the system
lComparablewith Dakin products
lNon-ionic Perfluorinated polymer emulsion
lAppearance: Milky emulsion or faint yellow emulsion
lSolid content: ~30%
lIonicity: weak cation
lSolubility in water: soluble easily in water
The product doesn’t contain alkyl phenol polyoxyethylene ether compounds (APEO). The perfluorinated octyl sulfonamide (PFOS), heavy metals and perfluoro caprylic acid (PFOA) content are all below 1 PPM. The product meets the export standards.
Package, storage and transportation
lAvailable in200 kg/barrel or 25 kg/barrel
lStorage period: 12 months in closed containers, shady and dry place
lAccording to non-dangerous goods transport
1. The preparation of textile fabric
lIn order to get the optimal effect, you must remove the additives on the surface of fabric, such as wetting agent, dyeing auxiliary, softening agent and so on.
lPieces of fabric fiber rate must be less than 1.5% and recommends testing by AATCC97. In addition, ensure that the fabric in weak acid, alkali content less than 0.05% and recommend testing by AATCC 144.
lAvoid reducing effect, raising and sand grinding should be carried out before finishing; Some mechanical finishing, such as calendering, electro-optic and brush can be conducted between drying and baking.
2. The preparation of solution
lFirstly, add the quantitative PF-2089Q into the clean container, and then the quantitative water is added into. Finally, stir the solution at a low speed until uniformity.
lPreferably, have a test before mass production. For new fabric, using PF-2089Q to preparation the duplicate worksolution, the one is not to adjust pH value, the other is adjustedthe pH value to 4 by adding 0.1% acetic acid. According to the same test conditions to test them, find the optimal pH value.
lWhile using it with crosslinking agent, penetrating agent, crease resistant resin and other additives together, all of these additives should be separately diluted and avoid additives raw solution mixing.
3. The recommended dosage
lPolyester fabric:20~60 g/L
lNylon fabric:20~ 60g/L
lPolyester or cotton fabric 40~80 g
4. The application method
lpH value (according to the test result)
lPredrying temperature: 110~130℃
lBaking: Recommended 170℃ (fabric surface) by the stenter setting machine and the baking time is 60 seconds
lWhile using it with crosslinking agent, penetrating agent, crease resistant resin and other additives together, please must check its intermiscibility with other additives by test.
lAgitate the solution while preparing the PF-2089Q solution.
lThe product can increase the color degree and please check the color after processing.
lBaking should be fully to ensure the effect.
lPlease run out of the prepared solution within 12 hours.
lDue to the resin residue easily adhesion and accumulation on the roller, roller drying is not good method.