notice Note: Please be cautious and check with your supplier if this product is for virus protection purposes and if the coronavirus (COVID-19) will affect your order. close

Vacuum Tester ZJ45 for engine testing

$330.00 / Set | 4 Sets (Min. Order)
Compression Testing Machine
- +
Leather Testing Instrument
- +
0piecesselected, US $in total
View Details
Shipping fee:
Depends on the order quantity.
Lead Time:
To be negotiated
Customized logo (Min. Order: 5 Sets)
Customized packaging (Min. Order: 5 Sets)


Graphic customization (Min. Order: 5 Sets) Less
Samples: $320.00 /Set, 1 Set (Min. Order): Buy Samples
Contact Supplier
Samples - $320.00 /Set, 1 Set (Min. Order): Buy Samples
Loading... Add To Cart
Report Suspicious Activity
Quick Details
Place of Origin:
Shaanxi, China
Brand Name:
Model Number:
Electronic, 100W
Power supply:
50HZ-36L/min; 60Hz-45L/min
Vacuum level:

Packaging & Delivery

Selling Units:
Single item
Single package size: 
64X50X48 cm
Single gross weight:
13.500 kg
Package Type:
Carton box
Picture Example:
Lead Time :
Quantity(Sets) 1 - 1 >1
Est. Time(days) 7 To be negotiated
Company Information


Vacuum Tester


ZJ45 Vacuum tester is a portable device for measuring the vacuum which is mainly used to test the seal level of engine valve and valve seat before or after rebuilding the cylinder head. It can be also applied to test other vacuum purpose. 

The air tightness of cone face of engine valve and valve seat directly influence on the normal working of engine. Now ZJ45 can be used to measure and test, if the vacuum level is below 600 mbar, the valve and valve seat need to be repaired. When repairing, the valve grinder can be used to reface the cone of valve, also boring the valve seat with valve seat boring machine. To judge the valve and valve seat if reach the standard, you also can use this device to test after repair.

The unit is equipped with a vacuum pump. The quick-couplings makes it easy to connect and disconnect the adapters.

Choose the suitable cupule according to the size of air inlet of cylinder head. Insert the pipe of cupule into the plug of vacuum tester tightly. Open switch, put the cupule tightly on the inlet, now, the meter will show the readout. If the value is over 600 mbar (0.6Kg), it means the good seal.

Technical Info:
1- Power supply: 220V/1PH; 110V/1PH

2- Power: 100W
3- Output: 50Hz-36L/Min; 60Hz-45L/Min; 
4- Vacuum level: 900 mbar


1- Ensure the same power in case damage motor.
2- Keep the clean and dry environment.