Features: Chaff cutter is mainly used to cut the green or dry corn straw, rice straw and other stalks. It’s mainly used for forage feed processing and suits to feed the cattle, sheep, horse, deer and other animals. 1.The chaff cutter is suitable for cutting all kinds of dry and wet crop, corn straw, rice straw, wheat straw, bean stalk.
This machine has beautiful appearance, with full steel body, thick steel, coated by baking varnish craft, bright color, good durability, corrosion resistant, durable.
9ZP series products adopt automatic feeding device. The main frame, bracket and motor frame adopt combination of iron and steel structure, which enhance the stability of work, reduce noise too.
Cutting part adopt two,three, four, six groups plane oblique knife. Gear transmission enhances flexibility and service life, reduce grass resistance,
increase the grass feed quantity, reduce noise and improve the production efficiency.
Our machines will be tested before they leave the factory to ensure the quality of service and ensure that all parts properly qualified,make sure it works properly.All parts of our studio are equipped with static balancing equipment. After debugging and installation then commissioning , the power balance adjustment ensures that the machine runs with low noise, stable machines and long service life.
65# manganese steel blade with double-sided serrated knife, Serrated blades available use on both sides , and when the side is worn out, the user can turn to replace the part, but can not change the blade position transformation, user can only turn to the original position, in order to ensure the static balance and stability.cutting and grinding the feed, improve the crushing rate at the same time.
Multi-hammer design increases the degree of material fragmentation.When the saw tooth hammer wear without edges, the user can turn the hammer replacement, but can not replace each other , can only change to the original position, so as not to affect the rotor balance .
Our company developed a special structure based on customer feedback.The comb grass device makes the grass part uniformly feed without winding, keep same cutting length of grass and increase the rate of crushing grass .
Gearbox can adjust the length of the grass
Length of hay (short/medium/long )
3 blades gear-box adjustment to1.6/2.7/4.5 cm
4 blades gear-box adjustment to1.2/2.0/3.4 cm
6 blades gear-box adjustment to0.5/1.5/2.0 cm
Users can select and configure the chaff cutter machine according to their animals
2.It is used for the cattle farm, farmers to feed cattle, horses, sheep, deer, rabbits and so on. 3.Chaff cutting with long capacity of feeding port , long range of high chaff discharging and a low discharge port ,high capacity of chaff cutting. 4.3pcs/4pcs/6pcs blades can be selected. 5.The hay cutting machine has gearbox can adjust the length of grass cuttting 6.Suitable for large volume production.
Chaff cutter display
Application of cutting machine
Chaff cutter machine is mainly used to cut the green or dry corn straw, rice straw soybean stalk ,alfalfa ,fresh grass ,wet grass crop straw,Pennisetum hydridum,Pennisetum alopecuroides,cat tail ,Hyacinth Bean Stalk,Pasturage grass , wheat stalk, oats stalk, rye stalk, barley stalk,maize stalk,sugarcane top,Sorghum Hybrid Sudangrass,Sorghum sudanense and other stalks
High intake of animals ,easy digest , save dollars on feed.
good helper for farm, mariculture operators ,plant.
Body Material: Full steel construction durable
Hay size can be adjusted by adjusting the number of blades
smooth stainless steel gear ,reduces drag long service life
foot - wheel mechanism makes it move easily
Solid cast grass roller more durable than a hollow grass roller
65# manganese steel blades , more durable and harder with longer service life ,available on both sides blades .users can change blades by themselves
Crushing blades on the inner wall ,improve crushing effect .
Serrated hammer blades ,improve crushing effect
Fan blades drive cutting grass eject
Power and Principle
Motor power /gasoline engine /diesel engine all can match the chaff /hay cutting machine
The machine used for cutting green (dry) corn stalks, straw and other crop stalks and forage. by the motor as a supporting power, the power transmission to the spindle, the other end of the spindle gear through the gear box, universal joints, etc. It will be passed through the speed of power transmission to the pressure roller, when the material getinto be processed into the upper and lower pressure roller, Holding and at a certain rate into the cutting mechanism, the high-speed rotation of the cutter after cutting, the grass is thrown out of the machine by discharge port.
Packaging & Shipping
Standard export carton packing.
3-20 days after confirming order,detail delivery date should be decided according to production season and order quantity.