notice Note: Please be cautious and check with your supplier if this product is for virus protection purposes and if the coronavirus (COVID-19) will affect your order. close

cement canvas quicker and less expensive to install than conventional concrete

$16.00 / Square Meter | 1 Square Meter (Min. Order)
Type:
Concrete Canvas
$16.00
- +
available
0piecesselected, US $in total
View Details
Shipping fee:
Depends on the order quantity.
Lead Time:
10 day(s) after payment received
Customization:
Customized packaging (Min. Order: 20000 Square Meters)
Customized logo (Min. Order: 20000 Square Meters)
Samples: $1.00 /Square Meter, 1 Square Meter (Min. Order): Buy Samples
Contact Supplier
Samples - $1.00 /Square Meter, 1 Square Meter (Min. Order): Buy Samples
Loading... Add To Cart
Report Suspicious Activity
Overview
Quick Details
Warranty:
More than 5 Years
After-sale Service:
Online Technical Support, Onsite Installation
Project Solution Capability:
NONE
Place of Origin:
Shandong, China
Brand Name:
NuoLian
Model Number:
TGCC018
Usage:
construction,emergency shelters and artistic works
Advantage:
save 95% material;flexible and effective
Lenghth:
customized
Package:
Roll in bag
Size:
1.6m*5m/2m*5m or customized length
Application:
irrigation canals,Disaster Shelters,seepage in water canals
Specification:
Solidify on hydration
Weight:
15KG/㎡
Color:
Gray
Keyword:
cement cloth,concrete canvas,concrete shelters

Packaging & Delivery

Selling Units:
Single item
Single package size: 
20X20X1 cm
Single gross weight:
0.500 kg
Package Type:
Products are dispatched as rolls with the width 1.6m or 2m, length can be customized,Pakage in plastic bags
Lead Time :
Quantity(Square Meters) 1 - 100000 >100000
Est. Time(days) 10 To be negotiated

--- PRODUCT DESCRIPTION ---

 

 

Concrete Canvas is a new product with revolutionary materials called Geosynthetic Cementitious Composite Mats used as an alternative to conventional concrete. It is a flexible, concrete filled geotextile that hardens on hydration to form a thin, durable, waterproof and low-carbon concrete layer.Essentially, it’s concrete on a roll.

 

  Item   Thickness/mm     Area of roll/square meters

  Density

kg/square meter

       Width/m
CC10-110       1015            1.6 
CC10-2                 10                             10                   15           

           

           2

  

Remark:Special specification and size can be customized according to requirement of contract or agreement.

 

Technical data

 

ITEMTestStandard value
1.1Compressive strength testASTM C4730710 days compression failure stress40MPa
1.2Compressive strength testASTM C4730710 days compression Young's modulus1500MPa
2.1bending testBSEN12467:200410 days bending failure stress34MPa
2.2bending testBSEN12467:200410 days bending Young's modulus180MPa
3.1CRB puncture resistanceEN ISO 12236:2007 (HJ008 only)Minimum propulsion penetration2.69KN
3.2CRB puncture resistanceEN ISO 12236:2007 (HJ008 only)peak Maximum deflection 38mm
4.1Anti-vehicle applied loadEN1991-1-1:2002 standard (H008 only)2-axis vehicle gross weight30-160KN
4.2Anti-vehicle applied loadEN1991-1-1:2002 standard (H008 only) Evenly distributed loads5KN/m2
5PVC liner thickness0.42mm

 

 

--- PRODUCT DISPLAY ---

 

 

 

 

--- PRODUCT APPLICATION ---

Concrete canvas  is widely used in the below areas

1)channel ling-Ditch lining ,Canal lining, Agricultural irrigation channels

2)slope protechtion-Embankments,Outfall Protection ,Slope Facing

3)Remediation-Concrete Repair,Concrete Resurfacing,Lagoon Lining,Culvert Lining,Reservoir Lining

4)Weed Suppression-Weed Control,Vegetation Control

 

 

 

 

 

Concrete Canvas Installation

 

1, preparation work

First, we must plan and measure to ensure a certain slope so that the water flow can flow smoothly from the upper end to the lower end. Secondly, after the construction site is cleaned and leveled, the construction line is set according to the design drawing, and the drainage slope is re-measured.

2, excavation

Set the construction line according to the design requirements, the sides of the ditch need to be leveled, and the slope inside the ditch must not have any virtual soil and empty holes. It is necessary to treat the water damage parts in a tamping manner, except for debris and gravel in the slope. If necessary, use ash soil for compaction treatment, or grouting and reinforced to seal, and the treated parts are required to have good stability.

3, laying

The material can be laid vertically and horizontally. Be sure to level the substrate, otherwise it will affect the appearance quality!

4, seam processing

4.1. The lateral width of the adjacent two cement blankets is 10cm wide and the depth is doubled.

Place the cement blanket joint at the stack and flatten it.

4.2. Press the cement blanket above the cement blanket in the direction of the water flow, and the superimposed area shall not be less than

4.3 Evenly apply sealant at the seam.

4.4 Fix two pieces of cement blanket with 5*38mm stainless steel screws

4.5 groove along the treatment

Fix the edge of the material on the edge of the groove with rivets, and fix it with rivets, fix it and use it.

The soil covers the edge

4.6 watering solidification

Before the watering, it is necessary to inspect and check the whole of the laying. After passing the water, it can be watered!

It needs to be watered 9kg (thickness is calculated in 10m) to be poured, and it must be poured less, evenly from the edge to the middle.

Sprinkle water, preferably by spraying, the flow rate is 4000ml/min until the color of the cement blanket becomes darker.

Do not use a water column with a high pressure! Do not step on the water after pouring water. When the temperature is ≤ 5 °C, take insulation measures.

When the average temperature of day and night is higher than 30 °C, the surface should be covered with plastic film or geotextile, etc.

Keep wet, watering and curing time should not be less than 3 days

    

 

 --- Related Products ---

GridPond linerGeotextile
MORE >>MORE >>MORE >>

 

 

 

--- ABOUT NUOLIAN ---

 

   Taian Nuolian Engineering Materials Co.,Ltd, located in Shandong Province, a large coastal province in eastern China, It is connected to numerous ports and has convenient transportation and advanced communications.

    The company has 86 middle and high-level professional and technical personnel. With Karl Mayer's high-speed "Raschel" warp knitting machine, Marimo multi-axial looms, Dorialooms, and two bi-directional grid production lines, two unidirectional grid production lines and master Menzel's coating technology.

--- FAQ ---

 

Q:Are you trading company or factory?

A:We are factory for some main product, for other product we are trading company.

 

Q: How long is the delivery time?

A:Generally it is 2-3 days if the goods are in stock. Or 10-15if not in stock, according to the quantity.

 

Q:Do you provide samples?

A:Yes,samples are free.

 

Q:What is your terms of payment?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment.