Frozen fat dissolving technology is gradually absorbed the subcutaneous fat calories. Fat cells temperature are reduced to zero degrees Fahrenheit, or they will be frozen. Low temperature in the killing of fat cells without affecting the skin or muscle. The death of fat cells followed by the liver is discharged in vitro. Technical parameters: The host display: 8" TFT color touch screen Power: 400W Vacuum: 650mmHg Pump flow: 60L / min Vacuum pressure: 0 - 100Kpa Refrigeration temperature: 5C, 0 C, - 5 degrees C, - 10 degrees C. Burst fat frequency: 35 -- 40K Frequency: 10MHz Working voltage: AC220, 230V 50Hz, AC110 - 120V 60Hz; Packing size: 54 * 55 * 63CM
Treatment set 1.Each part needs 30 - 60 minutes (depending on the fat thickness and health ). 2.Only a portion of a part of the treatment of fat, for example, to eliminate the fat in the waist, you need to complete a few courses. 3. After a course of treatment, and another one of the cooling process in the same position for 2 to 3 months, can reduce the redundant fat layer thickness, after two times of treatment, can enhance the frozen fat dissolving operation, but is not recommended for multiple randomized treatments. 4.Frozen fat dissolving therapy is mainly directed against the local hypertrophy fat accumulation zone to design, the physical health of people, but not for the overall obesity, mainly used for the treatment of a particular part, such as the fat in the waist, abdomen and back, and other local fat. Its treatment is not omnipotent, not the treatment of obesity, it cannot replace liposuction or other invasive treatment. Substantial weight reduction should by eating a balanced diet and regular exercise, frozen fat dissolving therapy can only carry extra fat elimination. Skin antifreeze: Treatment process in the application of qualified antifreeze, when the temperature is lowered to 0 to - 40 degrees to avoid frostbite. [ consumables, buy their own ] The treatment process: 1.Treatment, testing to see whether it is normal heart rate [50-100 ]. 2.Check the thickness of fat. 3. Clean the treatment area, area of hair removal treatment. 4.Marking the treatment zone size. 5.In the treatment of areas with antifreeze. 6.At the treatment site paste antifreeze membrane. 7.Patients undergoing treatment, should sit so that the upper torso and thigh was 90 degrees. 8.The cooling device to gently suck into the treatment site, and setting the vacuum suction strength. 9.Regulate the suction strength to the appropriate time, maintain a constant suction, suction can according to customer 's ability to accept appropriate adjustment. At the same time to meet the suction massage mode. 10.Treatment of 25 - 30 minutes, press the stop control keys, stop suction., screening and adding antifreeze. 11.Repeat steps 10 to 11, until the completion of course [again ] power off by pressing the start button. After treatment: After treatment of the skin may appear slight injury, frostbite, pigment, careful nursing.
The matters needing attention
1. The equipment must be operated by professionals.
2.Do not use without antifreeze.
3.Patients with the use of the following medical electronic equipment cannot be used by the device:
- The implantation of a pacemaker or other implantable electronic device;
- To preserve the life of the artificial heart lung machine;
- Portable electrocardiogram measuring equipment;
4.Following patients in the use of machine before the professional doctor agree
- Patients with acute diseases;
- Malignant tumor;
- Patients with infectious diseases;
- Pregnant women;
- Patients with heart disease;
- Patients whit a fever;
- Being treated or those with physical anomalies in patients;
5.Patients following the use of this device should be careful
- For babies and toddlers;
- Sensory or physically impaired person;
Liver problems, Raynaud's disease, severe cold urticaria, cold globulin hematic disease, cold fiber hypoalbuminemia, severe burns, severe diabetes and older adults, children, frail and very resistant to freezing.
8-inch wide color touch screen
Cooling device output temperature
Cooling device output pressure
AC220, 230V 50Hz, AC110 - 120V 60Hz;
0 - 100Kpa
Why choose BeYoung?
Founded in 2005, Guangzhou BeYoung Beauty Equipment Co., Ltd. specializes in the research, development, production and distribution of professional beauty equipment.
We have professional and advanced production lines, research & design department, excellent management system, skilled work staff, and complete after-sales service, to provide high quality products to our valued customers and cooperative business partners from local and overseas areas.