<110μm (If you have any other request please inform me)
1° to 95°+
Salt fog test
Heat resistance test
Excellent gloss retention, E≤0.3-0.5
Note: 1. The tests are conducted on the cold-roll steel sheet (thickness: 0.8mm) which is cleaned and degreased. The coating thickness is about 70μm. 2. The coating performance index may slightly decrease as the gloss decrease.
workpiece temperature 160°C for15-20min and 18°C for 15min
Phosphating, sandblasting, shot peening treatment according to the substrate material
Corona electrostatic spraying. If adopt other spraying coating please inform in advance
8-10 m2/kg (coating thickness 60μm)
Automobile engine, gearbox, chairs, fuel tank, wheel hub, filter, joystick, mirrors, wiper and speaker parts etc.
25Kg/carton. The cartons lined with polyethylene plastic bags, non-dangerous goods, can transport a variety of ways, but should avoid direct sunlight, avoid to be affected with damp and avoid contact with chemicals.
Stored at 30 °C, ventilated, dry and clean indoor, shall not be close to the fire, heat, avoid direct sunlight, it is forbidden to open piled up. Under the condition, it can be stable storage for six months.
Health and safety
Keep sealed. Shall not be close to the fire, heat. Avoid inhalation powder. Smoking is forbidden in storage places. The worker should wear anti-static shoes.