Field maintenance and repair service, Free spare parts, Online support, Field installation, commissioning and training, Video technical support
Key Selling Points:
After Warranty Service:
Video technical support, Online support, Spare parts, Field maintenance and repair service
Hotels, Garment Shops, Building Material Shops, Machinery Repair Shops, Manufacturing Plant, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Advertising Company, cnc metal cutting
Local Service Location:
Japan, Malaysia, Australia, Morocco, Kenya, Argentina, South Korea, Chile, UAE, Colombia, Algeria, Romania, Bangladesh, South Africa, Kazakhstan, Ukraine, Kyrgyzstan, Uzbekistan, Tajikistan, Canada, Turkey, United Kingdom, United States, Italy, France, Germany, Viet Nam, Philippines, Brazil, Peru, Saudi Arabia, Indonesia, Pakistan, Mexico, Russia, Spain, Thailand, None
Morocco, Chile, Malaysia, Australia, Turkey, United States, Viet Nam, Mexico, Russia
Continuous Working Pressure:
imported from USA
1*1m, can be smaller
(415v/50hz), 380V/50HZ, ( 220v/60hz), 3 phrase
imported from TAIWAN HIWIN
cnc metal cutting
30 Set/Sets per Month
Packaging & Delivery
wooden case or soft packing
1 - 1
To be negotiated
low price 1*1m small metal steel sheet water jet cutting machine
our direct drive pump can save your 60%-70% electricity cost and improve 20% cutting speed!
1. we promise 2 years( 2000 hours) warranty always. and have got CE certificate 2. we use flow type cutting head, the cutting efficiency is at least 10% higher. 3. the abrasive sand hopper beside the cutting head is also flow design. 4. we have new technology that can make the machine moving speed is to 20-30m/min. normal speed is 6m/min as you see. if this technology used in pure water cutting, the cutting cost will reduce 50%. if using other materials cutting like glass , marble, steel, the cutting cost will also 20-30% reduced. but of course , the machine with this function price will be a little higher. 5. we use soft cover of the linear guider, can prevent dust away from the linear guider, so keep the linear guider keep precision longer. 6. we assemble an auto oil feeding to linear guider, so customer needn't maintenance the linear guider always. 7. seperated body. 8. we will send a remote control pendent. 9. we have the world most convenient abrasive sand removing system. it can be used for any brand water jet cutting machine, maybe you can promote this system in your country and other countries. please check the attachment. 11. we supply 420mpa pump with 37KW motor, but the price of the whole machine is very competitive now 12. we use variable pump, so can reduce electricity cost for customers. 13. we can do 220V and 415v also. 14. like height tracking system, positioning system , we can also provide. 15. all our components are SCHNEIDER brand 16. the motor and PLC are SIEMENS brand. 17. we can provide 5 axis with 10 degree and 3D 5 axis with 60 degree and robot waterjet 18. use 10mm steel for water tank supporter and use 8mm steel for beam, keep the machine working more stable. 19. use JAPAN YASKAWA servo motor. 20. imported TAIWAN HIWIN ball screw and linear guider 21. imported America intensifier and TAIWAN accumulator and high pressure assembly and low pressure assembly. if you have special requests, we can also do.
22. we can provide 87Kpsi intensifier pump and direct drive pump.
1. Automatic lubrication system from the Valley of Japan.
2. The internal components are selected from Schneider International brand, with first-class quality and reliable work.
3. Way of drive : Servo ( drives and motors are from Japan YASKAWA ).
4. High precision, Ensure cutting results.
5. Provide customizable services.
6. After-sales Service: Field maintenance and repair service, Online support, Field installation, commissioning and training, Video technical support, Free spare parts.
Can be customized to any size, mini platform or ultra-large platform or other size can be customized.
SPECIFICATIONS FOR WATER JET CUTTING MACHINE
HP intensifier pump
HP hydraulic intensifier pump
Maximum pressure: 60000Psi.
Boost ratio: 20:1.
Working pressure: 46000 Psi -55000 Psi.
Maximum displacement: 3.7L/min.
Inlet pressure: 0.4MPa.
Main motor power: 37KW.
With Siemens motor and Siemens high quality PLC control
Intensifier parts and pipe system (high pressure cylinder, Ceramic plunger assy, high pressure seal, low pressure seal, high pressure pipeline, check valve, etc.)
Single row water filtration system (5Micron, 1micron, series)
Manual voltage regulation
Over-pressure automatic shutdown and under-voltage automatic protection function. A10V071 automatic variable oil pump and Schneider electrical components with high performance.
Adopt industrial PC
Dedicated water jet cutting software with graphic simulation running function, graphic input automatic programming function.
• Support for DXF files.
• Support forward and reverse processing functions.
• Uniform speed control function.
• Two modes of segmentation and smooth machining.
• Automatic processing with small arc speed.
• Coordinate recovery function after power off.
• Double lift speed parameter function.
• With cycle processing.
• Convenient pause to continue and start machining in any segment.
• Free time delay setting.
• Apply SIEMENS PLC instead of relay, buttons are Schneider.
• 170 liter capacity
• High-precision sensors alert operators when they need to replenish sand
• Safety relief valve
• Working pressure: 0.2-0.3MPa
• Water separator
No need electronic control, simple operation, reliable, maintenance-free.
Can supply the cutting sand quantity .
Need less than 0.2Mpa compressed gas pressure.
Provide sand storage for the water jet cutter and automatically transfer the sand to the sand bucket.
Can increase the automation of the equipment and reduce the labor intensity of the operator.
620 degrees in the furnace for 5 hours, down to 300 degrees for 3 hours, then naturally cooled in the furnace.eliminate internal stress in the welded frame.no deformation occurs during frame use,guarantee better cutting precision.
Shot blasting and powder coating
Remove impurities such as surface oxide scale to improve appearance quality.it can improve the fatigue fracture resistance of materials, prevent fatigue failure, plastic deformation and brittle fracture, and improve fatigue life.
Test the straightness and parallelism of linear guide rail with precision measuring instruments.
Guaranteed higher precision when the equipment is running after the linear guide rail is installed.
Calibrating equipment precision with a laser interferometer.guaranteed more accurate cutting precision.
Auto desanding system
Solves the problem of sand removal in waterjet equipment. High efficiently removes sand automatically.
This product is a new type of sand removal equipment independently developed by Shandong Womai CNC Technology Co., Ltd. Simple operation, high sand removal efficiency and almost no maintenance. The birth of the WAMI Auto desanding system for water jet cutting machinery solved the problem of clearing waste sand for water jet users all over the world.
Note: This part is optional and requires extra cost.
Features of WAMI water jet cutting machinery auto desanding system:
A: Does not affect the normal cutting of water jet cutting machinery.
The sand removing device can perform sand removing work while the water jet machine is working. The equipment has improved the traditional sand removal operation (the machine must be shut down, the water and sand of the tank are cleaned out and the water is filled again), which has gained valuable time for normal work.
B: Simple operation, complete sand removal and fast sand removal.
It takes only 5 steps to complete the sand removal work: 1. The equipment is in position → 2. the air source is switched → 3. The sand suction head is placed in the water tank → 4, open the air source switch to remove sand → 5, the sand chamber is full of shutdown and dump the waste sand. Sand removal rate of the equipment More than 90%.
C: Large capacity.
The device has a diameter of 630 (720) mm, a height of 2.1 M, and a sand removal of up to 460 (610) L. For example, a water tank of 2 m * 3 m can be used continuously after removing 3-4 cans at a time.
D: Thick steel plate, perfect hydraulic system.
The equipment tank is made of 8mm thick steel plate, and an advanced water sand separation system is integrated inside the tank. Base is 20mm thick steel plate for durability. The switch base uses a manual hydraulic system and is equipped with safety bolts to make the base switch and seal become
simple, safe and convenient.
E: Powerful and stable.
The equipment uses an advanced pneumatic diaphragm pump to generate a constant flow of high-pressure water under the drive of high-pressure gas.
Sand removal provides powerful power.
F: energy saving.
The entire sand removal process of the equipment does not lose water in the water tank and does not cause waste of water resources.
G: Mobile flexibility.
The device is equipped with a ear holder for forklift fork picking, which is convenient to move, and one sand removing device can be used for multiple water jets.
Our cutting sample
Cutting Speed of direct drive pump (mm/min)
Cutting Speed of 420MPa(mm/min)
Carbon Steel plate
Packaging & Shipping
1. Are you manufacturer or trading company?
We are manufacturer of water jet cutting machine in JINAN city, Shandong, China.
2. What kind of material does your water jet cutting machine can cut?
There are plenty materials our water jet cutting machine can cut, such as stone, ceramic, quartz, glass, foam, plastic, rubber, copper, brass, aluminum, mild steel, pre-hardened steel, titanium, inconel and cast alloy.
3. What's your CNC water jet cutting machine's max. cutting thickness?
Generally speaking, if cut steel the max thickness of our water jet cutting machine can be up to 240mm, but we suggest cut no more than 150mm for smooth cutting. Now our Z axis distance is 170mm, we can customize for customers. Regular thickness please refer to: Marble is 0-120mm; granite is 0-110mm; tiles are 0-40mm; glass and mosaic is 0-80mm; steel, stainless steel, copper is 0-60mm; aluminum is 0-80mm; plastic, acrylic, foam is 0-200mm.
4. How we supply after-service?
Some countries we have after-service department, we will provide local service, if have no local service, we will arrange engineer for overseas installation and training. The installation and training time is generally 7-10 days. And we also can provide installation videos.
5. What's your delivery time?
Generally speaking is 30 days. if have stock, 7-15 days.