2014 new designed pyrolysis machine getting diesel from waste tyre, plastic or rubber:
2*40HQ container for 5ton equipment. 1*40 HQ container and one 40FR for 10tons&12tons equipment
JZ High-Effective Trye Pyrolysis Plant to fuel oil
Now our engineers have a new design of the machine. The carbon black discharge from
the catalyst chamber. The slagout system could run in sealed, avoid splashing and pollution
during deslagging, give production workshop a good working environment.
(1)if the tyre is small,put it into the reactor directly;
(2)if the tyre is big or the material is plastic,cut the big tyre into small part
(3)the length of the belt is 8 to 10meters and the width is 0.8meter,which can
stretch into the reactor abundantly,
(4)what's more,the belt conveyor is auto feeding ,need less labor force,only
one person to operate it.
(1)the fuel you using for the reactor includes coal ,wood,natural gas or diesel,
(2)when the temperature arrives to 100,water steam can be eliminated by the
blowoff valve on the gas separator,
(3)when the temperature goes to 200,high purified oil gas comes into being.
(1)gas separetor can make oil gas and impurities separeted, remove the dust
and slag,speed up the pyrolysis process.
(2)As your request , a hommization design for the oil gas separator, we shall
equip a negative pressure device.
(3)After gas separator ,the oil gas flows into the depositing tank ,in which the
oil can be devided into light oil and heavy oil ,the heavy oil can floe into heavy
oil tank, while the light oil will flow into the cooling systerm.
(1)there are 16 pipes in the cooling pool as s type for a larger cooling area .
which shall be 66 square meters,each pipe is 6 meter without two elbows,
the thickness of the pipe is 2~2.5mm with a total length of 96 meters.
(2)After 15 pipe’s cooling, light oil flows into the light oil tank, but still remains
some combustible gas can’t be cooled down to oil. It shall be re-deposited through the 16th pipe.
(3)The final gas will burn the reactor as the recycling fuel through water seal.
(1)the smoke generated between the furnace and cover shall be attracted
down to the pool which is full of alkaline solution at a high speed by the
power of draft fan.
(2)After impact and atomization through 3 baffles, smoke and solution fully
mixed, solution catches the dust for the purpose if dedusting.
(3)Neutralization happens when the acid gas is mixed with the alkaline liquid,
for the purpose of sulfur removel.
(4)The rest smoke will cut into the water film cyclone, cylinder wall forms a
water membrane by centrifugal force, then dust will be absorbed by the water
membrane for the second dedusting.
(5)When the smoke flow into the chimney seat ,it will get a third dedusting
through a water cleaning tank in the chimney seat.
Main Parts of plant
Best after-sale service
1. We will supply the foundation drawings to buyer after get deposit.
2. We will send engineers to install the machine when the machine reach buyer's factory. The engineer will install, guide the machine, then training the workers for buyer.
3. We warranty the complete machine one year, we will maintenance all it life.When the machine can not running normal, the buyer can call us, we will help buyer repair it by call, if can not solve, we will send engineer to buyer's factory at the shortest time.if need change parts,the buyer can buy it from our factory.
Welcome inquiry from overseas friends,Contact us at any time!