Introduction of saw dust biomass rice husk briquette pressing machine
Biomass briquette pressing machine is pressing sawdust and biomass into sticks with a hole under high temperature and pressure.It's also called sawdust/wood briquette machine, rice husk briquette machine.
The internal structure of biomass briquette pressing machine
1. Electric control board
2. 15kw Motor
3. Under Hopper
5. Forming Cones
6. Wear sets
Main spare parts of biomass briquette pressing machine
The propeller we suggest that it should be repaired by welding every 3-7 days.
Raw material of biomass briquette pressing machine
Length<5mm ,diameter<6mm , humidity<14%
Technical parameters of biomass briquette pressing machine
Main features of biomass briquette pressing machine
(1) No need any binder
(2) Low cost ,high capacity
(3) Good quality , convenient maintenance
(4) Supply complete production line
Final product of biomass briquette pressing machine
Working principle and heating temperature
By high pressure and high temperature,the temperature is around 300°C to 330°C.
Welcome to our factory for visiting,we will pick up you at the airport.We can also send our engineer to your country for installing.We willA:Almost all the wood waste can be used ,such as sawdust ,wood chips,tree branches ,rice husk and so on ,but the size should less than 6mm.
If the material cannot achieve the requirement ,it should be crush first ,and the moisture of the raw material is about 8-12%
Final size should be lesA:Long bars in square shape or with hexagonal shape
Q:What’s the screw gap ?
A:The screw gap could be the size as 32mm,36mm,40mm. (36mm is the most common )
Q: What’s the advantages of biomass briquettes?
A:1.Increase the net calorific value per unit volume after biomass briquetting
2.Easy to transport and store as densified product 3.Better solution to the problem of residue disposal 4.Uniform in size and quality as a kind of biofuel briquette 5.Reduce excess deforestation by providing a substitute for fuel wood
Q:Can you provide the production line ?
A:Crush - dryer -briquette-package
1. Crush the raw material into small pieces (diameter is about 3-6mm)