Acrylic Diamond table type jewelry polishing motor
Function:Only need pass through one time the machine can remove all the saw marks and become shinny
Production: Single or Multi sheet together pass through our high accuracy auto feeding belt,
and pass through our hight accuracy natural diamond polishing tool to reach flat and shinny surface
Feeding speed:can adjust the motor from 0-20 per minute
Machine table size
460mm x 580mm
Total available track length
Max. work piece dimensions
Spindle drive motor
Constant tension, Dual belt feed
0-3m per min
Feed Speed(infinitely adjustable)
Feed belt motor
220V, 1ph, 5Amp, 60Hz
Length (side to side)
Width (front to back)
1. Open the screw from the wooden box 2. Release the screw from the bottom and lift up
3. Put off the green cover on the macine 4-a. Open the screw and put the guide to both side
4 Open the screw and put the guide to both side
5. Put the guide track on the machine 6.Plug in the Power and Vacuum
7. Plug in power and vaccum machine power 8 Push the red switch to start working
The chart of machine
Q: WHY AFTER POLISHING THERE IS NO EFFECT?
A:HAVE TO FEED THE MATERIAL FLAT ON THE GUIDE TRACK THEN INTO THE POLISHING MACHNE
Q: WHY HAVE SOME LINES ON THE ACRYLIC
A:POLISHING SPEED HAVE TO ADJUST SPEED 24000 AND FEEDING MOTOR AROUND 30.
Q: WHY PLUG IN POWER BUT STILL CAN NOT START THE MACHINE?
A: CHECK IF THE URMERGENY IS BUTTON IS PRESSED OR OPERATION DOOR NOT CLOSED.
Q: HOW TO INCREASE THE PRODUCT SPEED?
A:USE CAN ADJUST THE FEEDING SPEED TO THE EFFECT THAT USER CAN ACCEPT.