What is tile mortar mixer? Tile mortar mixer is also called pre-mixed mortar, which made in the factory by precise batching and uniform mixing.
It can be used directly just by adding water in construction site.
It has different properties though adding different additives. Raw material of dry mortar: 1. Cementing material: cement, lime, plaster. 2. Aggregate: yellow sand, quartz sand, limestone, dolomite, expanded perlite etc. 3. Mineral admixture: industrial byproduct, industrial slag, fly ash, pozzolana, fine silica powder etc. 4. Water-retention and thickening material. 5. Chemical additives. Various kinds of dry mortar:
1. Adhesive mortar such as ceramic tile adhesive ,filler,heat preservation multiplexed system use adhesive mortar,etc. 2. Rendering mortar such as internal and external rendering mortar, lacquer putty, colored decoration mortar, heat preservation mortar,etc. 3. Masonry mortar such as normal masonry mortar,concrete masonry mortar,heat preservation masonry mortar,etc. 4. Floorscreed mortar ,such as normal floorscreed mortar ,self-leveling mortar,etc. 5. Special mortar,such as mending mortar ,waterproof mortar,etc.
Brief Introduction of tile mortar mixer
simple dry mortar production line (also called by simple dry mortar plant, small putty production line) is on the basis of efficient ribbon powder mixer, with adding configuration of hoist feeder, material storage tank, automatic filling machine and electric control cabinet, to form a effective and reasonable, easy operation production line.
simple dry mortar production line is less than 3.5 meters, ordinary houses can be use as factory production, this solve the problems of traditional dry mortar production line has to increase height of factory. It realize manual batching raw materials, automatic mixing, automatic filling and packing at 20-50kg/bag adjustable, under a small investment, and less labor. It is one of the most simple and practical dry mortar production line.
The Plant Working Site
1)FCL: in nude for standard exporting container 2)LCL: Poly wood case 3)Wire cables are used for fastening the machine 4)all surfaces are covered by plastic film