triband signal booster 2g/3g/4g signal booster/repeater 900/1800/2100MHZ
One set including:
1x tri band repeater of 900/1800/2100mhz(model: RP-GDU3000),
13pcs indoor ceilling antenna
1pcs outdoor log periodic antenna
4pcs N male to N male connector
4 pcs 4 ways splitter
A mobile phone signal booster is a device that boosts mobile signals to and from the mobile phone whether at home, office, basement or in vehicle.
It does this by taking the existing cellular signal, amplifying it, and then broadcasting to an area in need of better reception.
If you're experiencing dropped calls, slow or lost internet connection, stuck text messages, poor voice quality, weak coverage, low bars, and other cell phone reception problems, this booster is the best solution that produces definite results.
It helps end users to improve mobile signals for much better phone call quality and smoother data transmission. It is designed to support coverage area max up to 800 square meters with proper engineering. Below are the main features.
1. The repeater is an ideal solution for providing a cost effective improvement in cellular in-building coverage of a home, office, restaurant or building, in the quickest time possible.
2. Manual gain control (MGC) available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.
3. To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
4. Auto shut off function available for both uplink and downlink to avoid deep self-oscilation from jamming the towers, saving your trouble from operators.
5. Wide band feature enables all devices operating within the wide frequency range of the repeater to see an improvement in performance.
6. Multiple phones and other handheld devices throughout a building can benefit from a wireless repeater.
7. Supports up to 500 users / calls simultaneously.
8. Extended phone battery life. (Your phone does not need to put out as much power due to improved reception).
* With unique appearance design, good cooling function
* With MGC (Manual Gain Control) function, you can adjust the gain as needed ;
* With DL signal LED display, help to install the outdoor antenna at the best state;
* With AGC and ALC, make repeater work stable.
* PCB with isolation function, make UL and DL signal not influence each other,
* Low intermodulation, high Gain, stable output power
Step 1 Start by taking your phone up to the roof or other location outside to find where the signal is strongest.
Step 2 Temporarily mount the Outdoor (outside) antenna in that location. You may need to adjust and move the antenna later.
Step 3 Run coaxial cable into the building to a convenient loaction (attic, etc.) where you can also get standard power for the Signal Repeater.
Step 4 Place the Signal Repeater in that location and connect the coaxial cable to the Outdoor Side of the Signal Repeater and the Outdoor antenna.
Step 5 Mount your Indoor (inside) antenna in a productive location. You may need to adjust or move the antenna later. More notes on Indoor antennas and patterns here.
Step 6 Connect coaxial cable between the Indoor antenna and the Signal Repeater output port.
Step 7 Power up the system and check for signal inside the building. If needed, tune system by moving and or pointing the Outdoor and Indoor antennas until they get the most signal possible.
Step 8 Secure all antennas and cables, securely mount the Signal repeater and clean up the installation.
Online Order Terms and Conditions:
Here is our policies for online order, please make sure you have Read, Understood and Accepted the below terms and conditions Before bidding. Any question, welcome to contact us.
1. All major credit cards are accepted through Secure Payment. We also accept the payment by Western Union, Money Gram for small order and bank T/T for big order. To keep the goods available and order valid, payment should be made within 5 days of order. If you can't checkout immediately after auction close, please wait for a few minutes and retry.
2. We ship to worldwide except some countries and APO/FPO. Please make sure to provide correct and full shipping address, contact and necessary information. We are not responsible for any undeliverable address, wrong or incomplete information. Normally we only deliver to the confirmed order address. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery.
For Brazil and Mexico buyers, please leave your TAX number (CNPJ/CPF/RFC) after placed the order.
For Russian Federation buyers, please provide your full name in order to get your goods successfully.
For EU countries, sometimes EORI (Economic Operator Registration and Identification) Number is asked by the courier.
3. In case the courier chosen by the buyer is unavailable caused by the courier or its agent refusing, potential clearance problem at customs, no surcharge collected for remote area, freight rate increasing, and other unforeseen reasons, we’ll change to other similar way, for example, between DHL, TNT, FedEx, UPS, EMS or other express.
Delivery Surcharge asked by some couriers should be added for the order with remote (extended) area address, please inform us before paying if your address is in remote area. If we have to change the order courier due to the buyer not informing address remote and not paying the surcharge, we do not assume any responsibility for the possible delay or problem in delivery. Checking remote area at website:
4. If you have special requirement for the documents enclosed with the parcel, please leave a note in the order, we’ll try to do it but cannot assure. Otherwise, normally we would mention value and description as the original order; Sometimes we would be well-intentioned to write lower value or mark the goods as Sample or Gift with N.C.V. (no commercial value) or not to enclose invoice and shipping list, so as to minimize the possibility for delays during clearance or any import duties and taxes issues raised by Customs. Anyway, please note that we will not be responsible for any result caused by these.
5. Every country has different import policy, please check with your local Customs office to get enough information, such as: whether you could import the bidding goods and use it legally, what documents and certificates would be asked at customs clearance, what rules and standards should be compliant for the goods, how much import duties & taxes or fees would be charged to you, etc. If you have any question about the goods and any requirement for the document or certificate, please make sure to contact us Before bidding or paying.
It is the buyer’s responsibility to arrange the import clearance and pay import duties, taxes, and additional or derived charges that may occur. Please note we do not assume any responsibility and refuse to refund if the delivery delayed or failed caused from any import clearance problem.
6. Service transit time is provided by the carrier, excludes weekends and holidays. Transit times may vary, particularly during the holiday season. If you haven’t received your shipment within 30 days by express or 60 days by post, please contact us.
7. Please check the package before signing, in case of the product damaged or lost during the transportation, please refuse to sign it, you will be considered receiving the right and intact product as long as you signed the parcel.
8. We accept refund or replace goods if there is quality problem without human actions defects. In case of any problem, please contact us within 7 days upon your receipt of the goods, the pictures and qualified inspection report would be asked to evidence the problem. In case of the product in your possession more days, it is considered used and we will not issue you a refund or replacement. The return products should be in their original condition and packaging with mentioned return reason and buyer’s Aliexpress ID in order to qualify for refund or replacement. Normally the return cost should be borne by the buyer. Shipping and handling costs are not refundable.