AQ water based spray paint by Aeropak is an environmentally friendly, quick drying paint. the main benefit of AQ water based spray paints is that they produce much less organic fumes(VOC's) than normal paints. the good news is that by using AQ water based spray paints you can be clean up the air in your home and make a green change.and It can use on Porcelain, plastic, glass, benzene board, brick, asbestos tile and so on.
For best results, clean surface of grease, wax, rust and dust. Scuff or lightly sand all glossy surfaces removing any unwanted bumps or flaking paint, then dust off. Prime raw timber or metal with Aeropak primer and allow to fully dry.
1. Remove thoroughly the oil, soil, water stain and dust from the surface to be sprayed. 2. Shake the can well for about half a minute before spraying. 3. Apply first on an invisible part to make sure the selected color is well matched 4. Keep 15-30 cm away from the surface to be sprayed. 5. In case of little paint or only gas out, turn the nozzle 180° and try again. 6. During spraying, keep the can upright within a vertical angle of 45°. 7. After use, clear the valve and nozzle by spraying upside down for a few seconds.
1. Content under pressure. Keep away from heat, flame, spark and other source of ignition. 2. Do not spray on objects with direct contact of food. 3. Spray in well-ventilated place. A better coating effect will be gained if operate in a cool, dry and dustless environment. 4. Avoid applying the lacquer on a rainy or freezing day. 5. Do not clash, puncture, or incinerate the can, even after use. 6. Store in a cool, dry place (45°C); Avoid direct sunlight. 7. Keep out of the reach of children
Packaging & Shipping
If shipped by LCL, we will pack all the goods onto pallet, and wrap with plastic film to protect the goods safe in transportation, and make sure you will receive the ordered quantity of goods (will not get loss of the goods)
For Full container loading, we will ship only by DG cargo container ( UN1950, IMO 2), and will put a net at the back of container to prevent goods drop down and hit workers on the ground.
Offer OEM and ODM
I-like offers OEM and ODM service for free with its first-class design team, professional technical advisers, a management team, and high-quality research and development staffs. We bring together the elite group of modern marketing to provide comprehensive?solutions so that help enlarge customers’ business and get good reputation.
Any of the items be of interest to you, we will pleased to give you details.
We provide OEM and ODM. We will help you to design your own design style and deal with the problems you meet timely before the products reach your hand.
If any of our customers find the product is defective(but we will try our best to avoid this problem), we will help you to solve the problems first. If it was our fault, we will undertake our responsibility and have a refund.
3.Our competitive edge over other suppliers is that we offer solutions rather than supplying goods and services. We provide an excellent combination between prices, quality & responsibility.
Q1:Are you factory?
A1: yes, we are factory.
Q2:What’s your payment terms?
A2: We accept T/T,L/C,Western Union.
Q3:Can I do an OEM?
A3:Yes,we do the brand, logo as your requirements.
Q4: What’s your shipping way?
A4: By sea, by express delivery.
Q5: What other products do you have?
A5: Besides tyre repair products, we also have many other products, such as aerosol spray paints, car care products, household care products, industrial products etc.
Q6:Why we choose you? What is your strength?
A6:With 10 years experiences in this field, we are a professional supplier of the well-know customers. Our facilities conform to the standard audit requirement and our products meet the certification terms from different countries and areas.
Q7:What is your terms of delivery? A7: EXW, FOB, CFR, CIF, DDU.
Q8:What is your sample policy? A8: We can supply 2-3 samples for free, but as this is aerosol products with pressurized gas, it is dangerous goods, the courier cost is very high, say about USD 100-200 for 2kg parcels. And the freight cost need to be prepaid by customers.
Q9: Agent's wanted?
A9: Welcome general agent all over the world.
Q10: I still have some doubts. What can I do?
A10: You are welcome to visit our factory and company.
Shenzhen I-Like Fine Chemical Co., Ltd
Add:10C, Bo Xing Building, Qing Shui He 1Rd, Luohu District, Shenzhen, 518000, China