CNC auto gluing machine is a high-performance equitment which is developed by our own company. By adopting international advanced CNC technology, it's very easy to operate. Widely be used in leather shoes, sport shoes, leather out-sole, rubber out-sole,bags,wallets,gloves and exercise equipments ect.
1.Easy to operate, you can set a programme by the control box or just programme through CAD ,CORELDRAW or some other softwear then transfer to PLT format by computer , and download into the machine.
2.No matter line,dot,curve or circle,any trail can do.
3.High speed, 10-15times than to manual.
4.High precisely, Homogeneous surface, no stack glue.
Single phase 220V(AC)
X,Y,Z 3 axis
Capacity of glue tank
spray/brush gun :
1.Import from Italy.
2.Do not need to clean until you change the glue.
3.Never dry even stop for 1 month.
1.You can programme by this handheld box,move with joystick.
2.Also you can input your design into this handheld box .
1.The table is with holes to get through air.
2.There is a blower under the table to make vacuum.
3Place a breathable non-woven fiber to keep the table clean.
Slideway with belt to seal:
1.The slidway is under the belt,can keep it clean.
1.The gun,pipe and glue tank are all for hotmelt glue.