Step By Step Guide To Setting The Calendar On Your Megir Parrot Series Watch With Ease

The Megir Parrot Series has earned a loyal following for its elegant design, affordable luxury appeal, and reliable quartz movement. While it mimics the aesthetics of high-end timepieces, one common challenge users face is navigating the calendar function—especially when first wearing the watch or after the battery has been replaced. Unlike smartwatches with automated syncing, analog watches like the Megir Parrot require manual adjustment. Getting the date wrong can be frustrating, particularly if you accidentally damage the mechanism by adjusting it during restricted hours.

This comprehensive guide walks you through the correct method to set the calendar on your Megir Parrot Series watch, avoiding common pitfalls and preserving the longevity of your timepiece. Whether you're a new owner or have worn yours for years, mastering this simple skill ensures accuracy and confidence every time you check the date.

Understanding the Megir Parrot Series Movement

The Megir Parrot Series typically uses a Japanese quartz movement, known for precision and durability. Most models in this line feature a standard three-hand configuration (hour, minute, second) with a single-date window at the 3 o’clock position. The crown—the small knob on the side of the watch—controls both time and date settings. It usually has two positions: pulled out halfway and fully extended.

Quartz movements rely on a battery-powered oscillator to keep time, which means the internal gears move in precise increments. However, adjusting the date too early or too late in the day can strain the internal gears, potentially causing misalignment or long-term wear. Understanding how the movement interacts with the calendar function is key to proper handling.

Tip: Never attempt to change the date between 9 PM and 3 AM. During this period, the internal gears are engaged in transitioning the date, and forcing a change may damage the mechanism.

Step-by-Step Guide to Setting the Calendar

Follow these clear, sequential steps to adjust the date and time accurately on your Megir Parrot Series watch:

1. Check the current time: Before making any adjustments, note the current hour, minute, and whether it’s AM or PM. This helps avoid confusion later.
2. Pull the crown to the first position: Gently pull the crown out to its first stop (halfway). On most Megir Parrot models, this allows you to adjust the date without affecting the time.
3. Rotate the crown to change the date: Turn the crown clockwise. Each full rotation typically advances the date by one day. Continue until the correct date appears in the window.
4. Push the crown back to its original position: Once the correct date is set, gently push the crown back in. Do not force it—ensure it clicks securely into place to maintain water resistance.
5. If time needs adjustment, pull the crown fully: If the time is incorrect, pull the crown all the way out. Rotate it to set the hour and minute hands to the correct time. The date will automatically advance each time the hour hand passes midnight.
6. Set to the exact time: For precision, synchronize your watch with an atomic clock or trusted time source (e.g., smartphone time).
7. Finalize and secure: Push the crown fully back in and ensure it’s flush with the case. Your calendar and time are now correctly set.

It’s important to note that the date changes as the hour hand crosses 12 AM—not necessarily when your local clock strikes midnight. Therefore, setting the time just before midnight and watching the date flip is a good test of accuracy.

Do’s and Don’ts When Adjusting the Calendar

To protect your watch and ensure smooth operation, follow these best practices:

Do’s	Don’ts
Adjust the date only between 3 AM and 8 PM	Change the date between 9 PM and 3 AM
Use gentle pressure when pulling the crown	Yank or force the crown out
Double-check AM/PM when setting the time	Assume the date changes instantly at midnight
Sync with a reliable time source	Leave the crown pulled out for extended periods
Clean hands before handling the crown	Expose the watch to moisture while adjusting

Real Example: Sarah’s First-Time Setup

Sarah received her Megir Parrot Series watch as a gift and was eager to wear it on her birthday. She opened the box, but noticed the date displayed “15” instead of “23.” Excited and in a rush, she immediately pulled the crown and began turning it. After advancing several dates, she realized the hands were moving too—she had pulled the crown too far. Slightly panicked, she pushed it back and tried again. This time, she consulted the user manual online and discovered she should only pull the crown halfway for date adjustments.

She waited until 10 AM, pulled the crown gently to the first notch, rotated it slowly, and successfully set the correct date. Then, she adjusted the time by pulling the crown fully and aligning it with her phone’s clock. By following the correct sequence, Sarah avoided damaging her new watch and enjoyed wearing it confidently throughout the day.

“Many people unknowingly stress their watch mechanisms by adjusting the date at the wrong time. A few minutes of patience can prevent years of mechanical issues.” — Daniel Reyes, Watch Technician & Horology Instructor

Tips for Long-Term Calendar Accuracy

Once your calendar is set, maintaining its accuracy requires minimal effort—but a few habits go a long way:

• Check the date monthly: Quartz watches are highly accurate, but minor drifts can occur. Verify the date alignment once a month.
• Replace the battery promptly: A dying battery can cause erratic timekeeping or incomplete date changes. Replace it every 2–3 years or when the seconds hand starts jumping in two-second intervals.
• Avoid magnetized environments: Strong magnetic fields from speakers, phones, or laptops can affect the movement. Keep your watch at a safe distance.
• Keep the crown sealed: Always ensure the crown is fully pushed in to maintain dust and water resistance.

Tip: If your watch hasn’t been worn for weeks, wind the time forward gradually before adjusting the date. This prevents gear slippage.

FAQ: Common Questions About Megir Parrot Calendar Settings

Can I set the date on my Megir Parrot watch at night?

No, it's best to avoid adjusting the date between 9 PM and 3 AM. During this window, the internal date mechanism is in transition, and changing it manually may cause misalignment or damage.

Why does the date change when I set the time past midnight?

The calendar function is linked to the hour hand. Every time the hour hand completes a full 24-hour cycle and passes 12 AM, the date advances by one day. This is normal behavior for analog quartz watches.

My date isn’t changing automatically. What should I do?

First, confirm the battery is functional. If the time is running but the date doesn’t change, the issue might be mechanical. Try advancing the time past midnight manually—if the date still doesn’t flip, consider professional servicing.

Conclusion: Master Your Watch, One Day at a Time

Setting the calendar on your Megir Parrot Series watch doesn’t require technical expertise—just attention to timing and technique. By understanding the mechanics behind the movement and following the right steps, you preserve both functionality and elegance. Whether you’re dressing up for a meeting or marking a special occasion, knowing your watch displays the correct date adds a layer of quiet confidence.

Take a few moments today to review your watch’s settings. Practice the correct method, share your experience, and encourage others to treat their timepieces with care. A well-maintained watch isn’t just a tool—it’s a daily companion worth respecting.

💬 Have questions about your Megir watch or a tip to share? Leave a comment below and join the conversation among fellow enthusiasts!