Step By Step Guide To Setting The Chronograph On Your Megir Quartz Watch Easily

If you've recently acquired a Megir quartz chronograph watch, you're likely drawn to its sleek design and functional precision. While it looks like a luxury timepiece, one of its most useful features—the chronograph—can be confusing at first glance. Unlike standard watches, a chronograph functions as both a timepiece and a stopwatch, allowing you to measure elapsed time with accuracy. However, without proper guidance, setting or using it can feel overwhelming.

The good news is that once you understand the layout and function of the crown and pushers, operating your Megir chronograph becomes intuitive. This guide walks you through every step clearly and practically, so you can confidently use all features of your watch—from setting the time to measuring intervals down to the second.

Understanding Your Megir Chronograph Watch

Megir is known for producing affordable yet stylish quartz watches that mimic high-end Swiss designs. Their chronograph models typically feature three sub-dials (also called registers), two pushers on the side of the case, and a pull-out crown. Each component plays a specific role:

• Main dial: Displays the current time.
• Sub-dials: Usually track seconds (small seconds), minutes, and hours elapsed during chronograph use.
• Crown (at 3 o’clock): Pull out to adjust time and date; also used to reset chronograph hands in some models.
• Top pusher (button at 2 o’clock): Starts and stops the chronograph timer.
• Bottom pusher (button at 4 o’clock): Resets the chronograph counters to zero.

Because Megir uses standard quartz chronograph movements (often based on reliable Japanese or Chinese ETA clones), the operation principles are consistent across most models—even if the case design varies.

“Mastering the chronograph isn’t about complexity—it’s about understanding sequence. Once you know when to press and pull, it becomes second nature.” — Daniel Reyes, Watch Technician & Horology Instructor

Step-by-Step Guide to Setting the Chronograph Function

Before using the stopwatch feature, ensure the main time is correctly set. Then follow these steps to operate the chronograph accurately.

Step 1: Reset Chronograph Hands to Zero

Before starting any timing session, always reset the chronograph hands. If they’re not aligned at zero, your measurement will be inaccurate.

1. Ensure the chronograph is not running (all hands should be stationary).
2. Press and hold the bottom pusher (at 4 o’clock) for 2–3 seconds.
3. Observe the central chronograph second hand and sub-dials resetting to “0.”
4. Release the button once all hands return to their starting positions.

Tip: Perform this reset before every new timing session to avoid cumulative errors.

Step 2: Start the Chronograph Timer

To begin measuring elapsed time:

1. Press the top pusher (at 2 o’clock) firmly but gently.
2. The central second hand will immediately jump into motion, counting seconds.
3. Simultaneously, the minute and hour sub-dials will begin tracking longer durations as needed.

Step 3: Stop the Timer

When the event you’re timing ends:

1. Press the same top pusher again.
2. The chronograph hand will stop moving, freezing the elapsed time display.
3. Note the reading: Central hand shows seconds, the 30-minute register displays partial minutes, and the hour counter tracks beyond 60 minutes if applicable.

Step 4: Reset After Stopping

After stopping the timer and recording your result:

1. Press the bottom pusher (at 4 o’clock) briefly.
2. All chronograph hands should snap back to zero.
3. You’re now ready for the next timing task.

This sequence—start, stop, reset—is fundamental to all mechanical and quartz chronographs. With practice, you’ll execute it smoothly in under five seconds.

Setting the Time and Date on Your Megir Watch

While not part of the chronograph itself, accurate timekeeping ensures your measurements align with real-world events. Here’s how to set the time and date properly:

1. Pull the crown out to the first position (one click). Rotating it adjusts the date window.
2. Pull the crown fully out to the second position (two clicks). Rotate to set the hour and minute hands.
3. Move the hands clockwise until the correct time is displayed. Avoid rapid backward rotation, which may damage the movement.
4. Push the crown back in completely to resume normal operation.

Tip: Set the time just before midnight and verify the date changes automatically around 12:05 AM.

Do’s and Don’ts When Using Your Chronograph

Do’s	Don’ts
Reset the chronograph before each use	Press both pushers simultaneously unless instructed otherwise
Use short, firm presses on pushers	Operate pushers while the crown is pulled out
Check battery level annually (low power affects accuracy)	Expose the watch to strong magnetic fields during timing
Keep the watch clean and dry after outdoor use	Submerge the watch in water unless rated for diving

Mini Case Study: Timing a 5K Run with Your Megir Chronograph

Take Sarah, a fitness enthusiast who bought her Megir chronograph specifically to track workout times. On her first attempt to time a 5K run, she pressed the start button late because she didn’t pre-reset the hands. Her recorded time showed 27 minutes—but actually included 12 extra seconds from a previous test.

After reading this guide, she changed her routine: Before each run, she resets the chronograph, sets the correct time, and starts the timer exactly as she begins jogging. Now, her data is precise, helping her monitor progress week over week. She even uses the hour counter for longer hikes exceeding 60 minutes.

This small adjustment made a big difference in her training consistency and trust in her device.

Frequently Asked Questions

Why won’t my chronograph hands return to zero?

This usually happens when the battery is weak or depleted. Quartz chronographs rely on sufficient power to snap the hands back precisely. Replace the battery at a certified service center if resetting fails consistently.

Can I use the chronograph underwater?

No. Most Megir watches are water-resistant (up to 3ATM or 5ATM), meaning they can handle splashes or brief immersion, but not prolonged submersion. Operating pushers underwater risks water ingress and internal damage.

Does using the chronograph drain the battery faster?

Slightly. While modern quartz movements are efficient, continuous chronograph use increases energy consumption. For best battery life (typically 2–3 years), limit extended stopwatch sessions unless necessary.

Final Checklist: Mastering Your Megir Chronograph

✔️ Before Use:

- Ensure the main time is accurate

- Confirm the date is correct

- Fully reset all chronograph hands

✔️ During Operation:

- Press the top pusher to start

- Press again to stop

- Read elapsed time from central hand and sub-dials

✔️ After Timing:

- Press bottom pusher to reset

- Verify all hands return to zero

- Store in a dry place away from magnets

Conclusion: Take Control of Your Time

Your Megir quartz chronograph is more than just an accessory—it’s a tool for precision, discipline, and personal organization. Whether you're timing workouts, cooking, meetings, or personal projects, mastering its functions empowers you to measure moments with confidence.

Now that you know how to set and use the chronograph correctly, there's no reason to let those dials sit idle. Practice the start-stop-reset cycle daily. Soon, operating your watch will feel effortless, and you'll appreciate the blend of form and function that makes Megir a standout choice in its class.

💬 Got questions or tips of your own? Share your experience with fellow Megir owners in the comments below. Let’s build a community of informed watch users!