All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(1231 products available)
A 15-segment LED display is a type of electronic display used to show numeric and alphanumeric characters. It is composed of 15 segments that can be illuminated in various combinations to create different characters or symbols. Here are the main types of 15-segment LED displays:
Standard 15-segment LED display
The customary 15-segment display is a type model that has all the 15 segments from a basic 7-segment LED and adds 8 more segments for letters.
Common Cathode 15-segment LED display
In a common cathode display, all the cathodes of the LED segments are connected to a common pin. This means that to illuminate a segment, the corresponding anode must be supplied with voltage while connecting the common cathode to the ground. This variety is preferred when multiple segments are to be lit at the same time, as it helps to reduce current fluctuations.
Common Anode 15-segment LED display
Conversely, in a common anode display, all the anodes of the LED segments are connected to a common pin (the power supply). To light up a segment, the corresponding cathode has to be connected to the ground. While this type also offers benefits in controlling multiple segments, it is not conducive for applications that require low power consumption.
Measurement of temperature
Due to their clarity, Segment Led Dispay are often used to display temperature measurements in industrial zones and laboratories. Temperature sensors can be directly connected to these displays so that users can see the current temperature at any point in time, which is also vital in safety and comfort.
Pressure Display
Pressure gauges, too, can benefit from these displays, as they allow operators easily and quickly see pressure levels within their systems. Accurate pressure readings are crucial for the safety and performance of equipment, so a clear and concise pressure indication is very important in industries like oil and gas.
Flow rate indication
In industries where the flow rate is measured, 15-segment displays serve as an important means of communication to operators. Used with flow meters, these displays help workers determine if the fluid movements in their mechanical systems are at ideal rates, thereby helping to avoid blockages or flow imbalance.
Chemical Concentration
Water treatment and chemical laboratories use 15-segment LED displays in concentration measurement instruments. By displaying concentration values, these displays contribute to the effective monitoring and regulation of chemical processes for safety and production efficiency in many industries that rely on chemical reactions.
Large Industrial Machines Readouts
Big industrial systems and machines incorporate 15-segment LED displays into their readouts to show a range of operating parameters. From temperature to pressure, speed and volume, these displays ensure that machine operators have the needed data for maintenance, troubleshooting and production monitoring.
Diagnostic Equipment Readouts
End users can also find these displays on testing and diagnostic equipment, particularly on electronic devices seeking to display diagnostic codes or system parameters. Such displays allow engineers and technicians to diagnose problems effectively while contributing to system maintenance and repair efficiency within various industries.
High visibility
One of these display's major features is its high visibility, as it presents data in a clear and easy-to-read manner, bringing understanding even from afar. This comes very handy in settings where operators have to do quick readings in dim or busy areas, hence its continued popularity and usage almost across the board.
Versatility
Apart from digits, it can also display letters and symbols; thus, 15-segment LED arrays can be used in many applications, ranging from simple numerals in counting to more sophisticated alphanumeric indictors that provide messages or instructions.
Low Power Consumption
It is also meant to help save power, especially with the increasing need to make devices more energy-efficient. It uses less energy to operate; thus, it is ideal for applications requiring constant display or embedded devices needing battery power.
Reliability
Because of their robustness, they work reliably in hostile conditions like manufacturing plants or outdoor facilities. They are well designed to stand up to high temperatures, bright light and other environmental factors that can reduce the performance of other displays.
Easy integration
Built with a standard interface, these displays are easy to integrate into other systems for control and monitoring in electronic design. This allows developers to incorporate them into new designs easily for many different applications.
Brightness and contrast
Brightness directly affects its visibility in different environments, meaning that industrial uses require higher brightness levels than consumer usage. The display also has to ensure good contrast with the background so that the emitted light will provide legible characters.
Segment shape and size
The morphology of the segment and its size directly influences the readability of the display. Larger segments enable greater visibility but take up more space on the panel; hence, it is important that designers find a balance between size and shape for better character display.
Viewing Angle
In designs of the LED displays, the viewing angle matters, as they may need to be viewed from different angles in various applications. For a better industrial display, the viewing angle should be broad enough that the readability of the displayed information will not be lost when viewed from below or above.
Temperature Resistance
Temperature ranges are also an important factor in determining the operating limits of the LEDs. Displays are usually put under harsh environmental conditions, and those working should have good thermal resistance so that they can operate continuously without fading or malfunctioning.
Power efficiency
Power efficiency is of primary concern in modern electronic devices, especially for those that have to put on their displays constantly. It is therefore important to differentiate designs that require large power consumptions from those that require low power consumptions.
Segment uniformity
This means that all segments must have the same level of brightness when turned on to avoid having some sections brighter than others, as this will cause character distortion and lead to a misunderstanding of the displayed information. Therefore, uniformity is vital for aesthetic and functional reasons.
Application requirements
This is the area where they'll be used. Some work areas might require high brightness or improved temperature ranges, while others could require a display unit that is more power-efficient or compact in design. To do well, one must know its use context and emotively select an appropriate display fitted for the application.
Visibility and readability
Visibility and readability in various industrial and environmental settings are very important. Select a display that provides good brightness levels, contrast and viewing angles to ensure that the information is clearly legible from any distance or angle.
Alphanumeric capabilities
Some applications only require numerical displays, while others may require letters or symbols. Choose a display that meets the required alphanumeric display capabilities for the application, such as simple numerical counts or more complex messages or instructions.
Power efficiency
If the display is expected to operate continuously or be used in a battery-powered system, it is necessary to ensure power efficiency to reduce energy consumption and operating costs.
Integration and compatibility
Check whether the 15-segment LED bar display can fit into existing system designs and whether its control interfaces and circuitry are compatible. This plays a huge role in saving both time and cost during system implementation.
Reliability and durability
Reliability in terms of measurements and good build quality are very important for industrial applications. Ensure that the display can withstand harsh working conditions and is protected from moisture, dust and physical shocks in order to guarantee long-lasting performance.
Segment uniformity
Select a display that provides good segment uniformity to ensure that all the segments are uniformly bright regarding its alphanumeric display. This will help improve readability and ensure that the characters look clear and easy to read.
A1: It has 15 small individual lighted sections called segments, which can form numbers, letters and some other symbols. It is used to show information in applications like instrumentation, industrial controls and medical devices. It is very versatile because it can show both numbers and letters and is good to see in bright or dark conditions.
The common cathode and common anode 15-segment LED display are different types of segment LED displays that show alphanumeric characters and that have an additional eight segments compared to the seven-segment display for better character representation. The difference between the two types of displays lies in their electrical arrangement.
A microcontroller can be used to drive the 15-segment LED display by sending control signals to the segments to show the desired character. The microcontroller can be programmed to control the display to show specific numbers, letters or symbols based on the application's requirements.
The key difference is the number of segments each display has. A 7-segment LED display contains seven segments that form basic numbers and a few letters, while the 15-segment LED display is made up of 15 segments from the 7-segment LED, plus eight more to show even greater accuracy. It can show all digits and letters from A to Z and symbols, making it a more versatile display for alphanumeric needs than the simple 7-segment LED display.
The common applications of 15-segment LED displays include digital measuring devices for voltage, current and resistance, process control systems that need to show parameter values like pressure, flow rate or temperature, medical equipment where alphanumeric information is vital for monitoring patients and instruments, embedded systems where these displays improve the system interface by providing clear data, industrial machinery dashboards in control rooms and field operations for reading system status and error codes, testing and troubleshooting tools where users need to read diagnostic information like operating codes or system parameters and in any electronic devices where clarity in the display of numbers, letters and symbols is needed.
