All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(12162 products available)
There are two types of 2-ohm subwoofers: single 2-ohm voice coil subwoofer and dual 2-ohm voice coil subwoofer.
Single 2 ohm subwoofer
A single 2-ohm subwoofer has one voice coil rated at 2 ohms. The impedance of this subwoofer is fixed at 2 ohms. This setup is straightforward and easy to understand. Users can wire the single 2-ohm subwoofer to a compatible amplifier using a single set of positive and negative terminals. The wiring options are limited to parallel configurations, making it simpler for those who are not familiar with complex wiring layouts. The single 2-ohm subwoofer is popular in basic sound systems where users want to enhance low-frequency output without getting into complicated configurations. Despite its simplicity, it can still deliver powerful bass responses depending on the quality of the subwoofer driver and enclosure design.
Dual 2 ohm subwoofer
A dual 2-ohm subwoofer has two voice coils, each rated at 2 ohms. This configuration provides more flexibility in wiring options and allows users to achieve different total impedances based on how the coils are wired. The dual 2-ohm subwoofer can be wired in series (resulting in a 4-ohm load) or parallel (resulting in a 1-ohm load) to the amplifier. This versatility makes it suitable for more complex sound systems and users who want to fine-tune their bass performance. For instance, wiring the coils in parallel doubles the cone area, lowering the impedance to 1 ohm, which can extract more power from compatible amplifiers. Conversely, wiring them in series increases the impedance to 4 ohms. This flexibility allows users to match the subwoofer's impedance to their amplifier's capabilities, optimizing performance and efficiency. The dual 2-ohm subwoofers are popular among audiophiles and those who require precise control over the bass output in their sound systems.
Here’s a rundown of the specifications of the 2-ohm subwoofer:
Power Handling
Power handling refers to the maximum power the subwoofer can handle without damage. It comes in two forms - RMS and Peak Power. A 2-ohm subwoofer has an RMS power of 200 - 1000 watts. Peak power is between 600 - 3000 watts.
Frequency Response
Frequency response is the range of frequencies the subwoofer can reproduce. The frequency response of a 2-ohm subwoofer is between 20 - 200 Hz. This means the subwoofer can produce deep bass sounds as low as 20 Hz.
Voice Coils
Voice coils are electromagnetic coils that move the cone of the subwoofer. This movement creates sound waves. A 2-ohm subwoofer has one or two voice coils, each with a 2-ohm impedance rating.
Excursion
Excursion is the maximum distance the cone can move in and out. This feature affects the loudness and clarity of the sound. A 2-ohm subwoofer has an excursion of 6 - 30 mm.
Sealed vs Ported
Sealed subwoofers have airtight enclosures. As a result, they produce accurate bass. Ported subwoofers have a vent in the enclosure. This leads to a louder bass.
2-ohm subwoofers must be well-maintained to ensure they last longer and have optimal performance. Here are some maintenance tips:
Regular Inspection
Inspect the 2-ohm subwoofer regularly to ensure it is in good condition. Also, inspect the wiring and connections to ensure they are not damaged.
Cleanliness
Keep the 2-ohm subwoofer clean. Dust and debris can affect the performance of the subwoofer.
Proper Usage
Only use the subwoofer as intended. Do not exceed the power handling capabilities. Doing so can damage the subwoofer.
Voice Coil Care
Handle the voice coil with care. Avoid pulling or stretching it, as this can affect the performance of the subwoofer.
Surround Care
Inspect the surround for any signs of damage. If the surround is damaged, replace it immediately to prevent further damage to the subwoofer.
Spider Care
Inspect the spider for any signs of wear or damage. If the spider is damaged, replace it to maintain the performance of the subwoofer.
Basket and Frame Care
Inspect the basket and frame for any signs of damage. If the basket or frame is damaged, replace it to ensure the subwoofer functions correctly.
When buying 2-ohm subwoofers for resale, it is important to understand the target market to stock the right products. The subwoofer's voice coil configuration is not very common in most households. It is mostly sought after by car audio enthusiasts who are looking to upgrade their audio system for better sound quality. The subwoofer is ideal for those who prefer to listen to music at high volumes.
Different models of 2-ohm subwoofers have different power handling capabilities. Some can handle low power ratings of around 150 watts, while others can handle high power ratings of 1500 watts or more. When choosing subwoofers to buy, opt for models with higher power ratings. They will be in high demand and resell easily. Clients looking to buy 2-ohm subwoofers are mostly interested in high-performance units that produce deep, low bass sounds. They will most likely avoid entry-level models that produce low-quality sound.
Consider buying 10-inch, 12-inch, and 15-inch subwoofers to cater to different customers with varying preferences. Most car audio enthusiasts prefer 12-inch subwoofers. Stock a few 8-inch models for customers looking to upgrade their audio system on a budget. The majority of 2-ohm subwoofers are designed for sealed and ported enclosures. However, some models come pre-loaded in a sealed box. They are ready to use and ideal for customers looking for hassle-free installation. They also require less maintenance compared to 2-ohm subwoofer speakers that come unloaded.
Look for reputable suppliers that offer quality 2-ohm subwoofer speakers. Check if the products are verified by relevant authorities and if they have quality assurance certifications. Ensure that the subs have quality checks, warranty claims, and after-sales services for customer satisfaction. To find the best deals, compare offers from different suppliers and read reviews from other customers.
Replacing a 2-ohm subwoofer can be a straightforward DIY task with the right tools and basic knowledge of car audio systems. Follow this step-by-step guide to ensure a successful replacement.
Before starting the replacement process, gather the necessary tools and materials. These may include:
Step-by-step guide
Disconnect the Power
Start by disconnecting the vehicle's battery to prevent any electrical short circuits. Locate the battery and remove the negative (-) terminal first, followed by the positive (+) terminal.
Removing the Subwoofer
Using a screwdriver or socket wrench, remove the screws or bolts securing the subwoofer in place. Carefully pull the subwoofer out of its enclosure, taking care not to damage any surrounding components.
Disconnecting the Wiring
Note the wiring configuration of the old subwoofer. Disconnect the speaker wires from the old subwoofer, using a wire stripper if necessary. If the wires are not color-coded, take a photo or make a diagram to ensure correct reconnection later.
Mounting the New Subwoofer
Place the new 2-ohm subwoofer into the subwoofer enclosure. Align the screw holes and secure the subwoofer using screws or bolts. Ensure a tight fit to prevent any air leaks.
Reconnect the Wiring
Connect the speaker wires to the new subwoofer, following the previously noted configuration. Ensure secure connections using a wire stripper and crimper if necessary. Wrap any exposed wires with electrical tape or use heat shrink tubing to prevent short circuits.
Reconnect the Power
Reattach the vehicle's battery terminals, starting with the positive (+) terminal and then the negative (-) terminal. Ensure both connections are secure and clean.
Testing the New Subwoofer
Turn on the vehicle's audio system and test the new subwoofer to ensure it's working correctly. Adjust the settings as needed to achieve the desired sound quality.
Q1: What is a 2 ohm subwoofer?
A1: A 2-ohm subwoofer is a type of speaker used in car audio systems to produce deep bass sounds. The "2 ohm" refers to its electrical resistance or impedance. It means the subwoofer has 2 ohms of resistance to the flow of electrical current. This lower impedance allows more current to flow through the subwoofer, resulting in more power and louder bass compared to subwoofers with higher impedance (like 4-ohm subwoofers).
Q2: Can one use a 2-ohm subwoofer with any amplifier?
A2: No, it's important to ensure that the amplifier is compatible with the 2-ohm subwoofer. Many amplifiers are designed to work with subwoofers that have 2 ohm, 4 ohm, or 1 ohm impedance. Check the amplifier's specifications to confirm its compatibility with a 2-ohm subwoofer.
Q3: What are the advantages of using a 2-ohm subwoofer?
A3: The key advantage of a 2-ohm subwoofer is its ability to produce louder and more powerful bass compared to subwoofers with higher impedance. This makes it suitable for genres of music that rely heavily on bass. Additionally, the 2-ohm subwoofer can be more efficient, providing better sound quality overall.
Q4: Can one connect multiple 2-ohm subwoofers to an amplifier?
A4: Yes, it's possible to connect multiple 2-ohm subwoofers to an amplifier. However, the total impedance seen by the amplifier will depend on how the subwoofers are wired (in series or parallel). For example, two 2-ohm subwoofers wired in parallel would present a 1-ohm load to the amplifier.
Q5: What is the difference between a 2-ohm and a 4-ohm subwoofer?
A5: The main difference lies in the impedance. A 4-ohm subwoofer has higher resistance to electrical current, resulting in less current flow, while a 2-ohm subwoofer has lower resistance, allowing more current to flow. This difference affects the bass response, with 2-ohm subwoofers providing louder and more powerful bass.
